Page 1 of 14 1234511 ... LastLast
Results 1 to 15 of 210

Thread: ***Bleedin Edge Case Mods***

  1. #1
    Crunchy Cheetos
    • RotorHead's Rig Specs
      • Motherboard:
      • IWill DN800-SLI
      • CPU:
      • 2x 3.2Ghz Xeon
      • CPU clock:
      • 3.78Ghz
      • memory:
      • Crucial 2GB DDR2 3200 ECC
      • graphics:
      • Two XFX 7800GTX in SLI
      • PSU:
      • OCZ Powerstream 600 SLI
      • Hard drives:
      • WD 73GB Rapters RAID 0
    RotorHead's Avatar
    Join Date
    May 2003
    Location
    32:07:00N, 110:48:22W
    Posts
    3,709
    Country:
    Users Country Flag

    Default ***Bleedin Edge Case Mods***

    The Bleedin Edge wants to see your Case Mods!

    We want to see it all!

    From the simple LED mod to the extravagant built from scratch Bleedin Edge stuff.

    The hard work that you have poured your blood, sweet, and tears into just to be the coolest guy on the block.

    Just post a couple of choice pictures (not huge) and a brief description of what you’ve done.


    RH


    Little black helicopters? If you only knew, HAHAHA!

    DN800-SLI | Dual Xeon 3.2Ghz@ 3.86/240FSB | Dual XFX 7800gtx | 2Gig ECC DDR2 | 2 Rapters RAID 0 | 1 WD 300 Gig | Plextor PX 716SA



    Hey...Don't touch that Squirrels nuts! It'll make him crazy!!

  2. #2
    Crunchy Cheetos
    • RotorHead's Rig Specs
      • Motherboard:
      • IWill DN800-SLI
      • CPU:
      • 2x 3.2Ghz Xeon
      • CPU clock:
      • 3.78Ghz
      • memory:
      • Crucial 2GB DDR2 3200 ECC
      • graphics:
      • Two XFX 7800GTX in SLI
      • PSU:
      • OCZ Powerstream 600 SLI
      • Hard drives:
      • WD 73GB Rapters RAID 0
    RotorHead's Avatar
    Join Date
    May 2003
    Location
    32:07:00N, 110:48:22W
    Posts
    3,709
    Country:
    Users Country Flag

    Default

    Here are a couple pictures of my main rig.

    Specs:

    Dual PIII-s 1.26@1.46 FSB 154 | Crucial ECC PC 2100 2X128 1X256 | MS-9105 Pro266TD Master LR | Visiontek Gforce 3Ti 500 | Sound Blaster Live | 9.1G IBM Ultra 160 | WD400BB | UltraPlex Wide | PlexWriter 12/4/32 | LS120 Super Drive | LiteOn FS020


    This shows my attempt at cable management 101, 3 SCSI cables running under the mobo, and twisted up IDE cables.



    this front and back view shows the stock fan grills cut out for better air flow.


    Well, there you have it, not much to look at but it gets the job done.

    Thanks Mik, for loaning me the camera.


    RH


    Little black helicopters? If you only knew, HAHAHA!

    DN800-SLI | Dual Xeon 3.2Ghz@ 3.86/240FSB | Dual XFX 7800gtx | 2Gig ECC DDR2 | 2 Rapters RAID 0 | 1 WD 300 Gig | Plextor PX 716SA



    Hey...Don't touch that Squirrels nuts! It'll make him crazy!!

  3. #3

    Default

    This is not really modding...but just want to share what i have...
    btw...my blue cold cathodes are not on...



    too slow compare to all the guys here...lol





    www.redcross.org - help save someone

  4. #4
    Administrator
    • Mikki's Rig Specs
      • Motherboard:
      • ASUS P4C800-E Deluxe Rev. 2.0 BIOS 1016
      • CPU:
      • iNTEL Pentium 4 Extreme Edition 3.4 GHz ES @ 3.5 GHz (269x13) 1.6 V
      • memory:
      • 2 x 512 MB OCZ EL PC-3500 Dual Channel Platinum Ltd. Ed. (BH-5) @ 215 MHz 2-2-2-5 2.85 V
      • graphics:
      • Connect3D ATi All-in-Wonder X800XT @ 567/550 MHz cooled with Zalman FS-V7
      • PSU:
      • Zalman ZM400B-APS
      • Hard drives:
      • 30g POS
    Mikki's Avatar
    Join Date
    May 2003
    Location
    A Padded Room
    Posts
    4,862
    Country:
    Users Country Flag

    Default

    Not much more than a nifty paint job.... Ignore the iPanel, it was temporary until I could mod a front usb panel.




  5. #5

    Default

    Holy cow Mikki!.How you gonna strap that to your back when you go to Lan partys.

  6. #6
    Member Gone Over The Edge
    • ThugsRook's Rig Specs
      • Motherboard:
      • Asus P5Q
      • CPU:
      • E8200 2.66ghz (Wolfdale)
      • CPU clock:
      • 1200mhz (6x200fsb)
      • memory:
      • 4gb Mushkin HP2-8500
      • graphics:
      • Geforce 7300LE (fanless)
      • PSU:
      • Enermax 400W
      • Hard drives:
      • OCZ V2 30gb SSD
      • OS:
      • WinXP32 Pro SP3
    ThugsRook's Avatar
    Join Date
    May 2003
    Location
    FLA
    Posts
    4,179
    Country:
    Users Country Flag

    Default

    Originally posted by LastRide
    Holy cow Mikki!.How you gonna strap that to your back when you go to Lan partys.
    what are you talking about? he drives it to lan parties

    my pics are comin soon! ~ Mikkis got me writing a case cooling article

  7. #7

    Default

    hehe,you could live inside that case
    Last edited by LastRide; 07-05-2003 at 08:39 PM.

  8. #8

    Default

    looks like a mini fridge with wheels...lol


    too slow compare to all the guys here...lol





    www.redcross.org - help save someone

  9. #9
    Administrator
    • Mikki's Rig Specs
      • Motherboard:
      • ASUS P4C800-E Deluxe Rev. 2.0 BIOS 1016
      • CPU:
      • iNTEL Pentium 4 Extreme Edition 3.4 GHz ES @ 3.5 GHz (269x13) 1.6 V
      • memory:
      • 2 x 512 MB OCZ EL PC-3500 Dual Channel Platinum Ltd. Ed. (BH-5) @ 215 MHz 2-2-2-5 2.85 V
      • graphics:
      • Connect3D ATi All-in-Wonder X800XT @ 567/550 MHz cooled with Zalman FS-V7
      • PSU:
      • Zalman ZM400B-APS
      • Hard drives:
      • 30g POS
    Mikki's Avatar
    Join Date
    May 2003
    Location
    A Padded Room
    Posts
    4,862
    Country:
    Users Country Flag

    Default

    lol! Yeah, I bought that a few years back when big cases were the IN thing....thought I'd give it a facelift a couple months ago. To be honest tho guys, it's sitting behind me unused...it's just to big to make it easy to get in and out of. I'm using a cr@p case for one rig and my Coolermaster ATC201 for the other....haven't modded either yet....

  10. #10
    Member Gone Over The Edge
    • ThugsRook's Rig Specs
      • Motherboard:
      • Asus P5Q
      • CPU:
      • E8200 2.66ghz (Wolfdale)
      • CPU clock:
      • 1200mhz (6x200fsb)
      • memory:
      • 4gb Mushkin HP2-8500
      • graphics:
      • Geforce 7300LE (fanless)
      • PSU:
      • Enermax 400W
      • Hard drives:
      • OCZ V2 30gb SSD
      • OS:
      • WinXP32 Pro SP3
    ThugsRook's Avatar
    Join Date
    May 2003
    Location
    FLA
    Posts
    4,179
    Country:
    Users Country Flag

    Default

    d@mn, i wish my case was that big! (youll need 2x 120mm blowholes in that thing)

    doesnt the side panel open easily? mod it!

  11. #11
    Administrator
    • Mikki's Rig Specs
      • Motherboard:
      • ASUS P4C800-E Deluxe Rev. 2.0 BIOS 1016
      • CPU:
      • iNTEL Pentium 4 Extreme Edition 3.4 GHz ES @ 3.5 GHz (269x13) 1.6 V
      • memory:
      • 2 x 512 MB OCZ EL PC-3500 Dual Channel Platinum Ltd. Ed. (BH-5) @ 215 MHz 2-2-2-5 2.85 V
      • graphics:
      • Connect3D ATi All-in-Wonder X800XT @ 567/550 MHz cooled with Zalman FS-V7
      • PSU:
      • Zalman ZM400B-APS
      • Hard drives:
      • 30g POS
    Mikki's Avatar
    Join Date
    May 2003
    Location
    A Padded Room
    Posts
    4,862
    Country:
    Users Country Flag

    Default

    Originally posted by ThugsRook
    d@mn, i wish my case was that big! (youll need 2x 120mm blowholes in that thing)

    doesnt the side panel open easily? mod it!
    It opens as easily as any other case, it's just that the config of my room is such that the only way to get into it is to disconnect everything and pull it out. Whereas a small case on my desk is nice and accessable...

  12. #12
    Member Gone Over The Edge
    • ThugsRook's Rig Specs
      • Motherboard:
      • Asus P5Q
      • CPU:
      • E8200 2.66ghz (Wolfdale)
      • CPU clock:
      • 1200mhz (6x200fsb)
      • memory:
      • 4gb Mushkin HP2-8500
      • graphics:
      • Geforce 7300LE (fanless)
      • PSU:
      • Enermax 400W
      • Hard drives:
      • OCZ V2 30gb SSD
      • OS:
      • WinXP32 Pro SP3
    ThugsRook's Avatar
    Join Date
    May 2003
    Location
    FLA
    Posts
    4,179
    Country:
    Users Country Flag

    Default

    you mean to put your case on the floor it would have to be on the "outside" of your desk on the right side?
    blocking itself from accesssability ~ i see.
    and i know you dont even have a left side of your desk

    mine is under my desk on the right side, so its not blocked at all.



  13. #13
    Administrator
    • Mikki's Rig Specs
      • Motherboard:
      • ASUS P4C800-E Deluxe Rev. 2.0 BIOS 1016
      • CPU:
      • iNTEL Pentium 4 Extreme Edition 3.4 GHz ES @ 3.5 GHz (269x13) 1.6 V
      • memory:
      • 2 x 512 MB OCZ EL PC-3500 Dual Channel Platinum Ltd. Ed. (BH-5) @ 215 MHz 2-2-2-5 2.85 V
      • graphics:
      • Connect3D ATi All-in-Wonder X800XT @ 567/550 MHz cooled with Zalman FS-V7
      • PSU:
      • Zalman ZM400B-APS
      • Hard drives:
      • 30g POS
    Mikki's Avatar
    Join Date
    May 2003
    Location
    A Padded Room
    Posts
    4,862
    Country:
    Users Country Flag

    Default

    Yep, exactly.....and to keep the front close to hand, I have to put it between the 2 sections of my desk, so I literally have to disconnect it and pull it out to get at it. It's really unfortunate but I can't really do it any other way....

  14. #14
    Member Gone Over The Edge
    • ThugsRook's Rig Specs
      • Motherboard:
      • Asus P5Q
      • CPU:
      • E8200 2.66ghz (Wolfdale)
      • CPU clock:
      • 1200mhz (6x200fsb)
      • memory:
      • 4gb Mushkin HP2-8500
      • graphics:
      • Geforce 7300LE (fanless)
      • PSU:
      • Enermax 400W
      • Hard drives:
      • OCZ V2 30gb SSD
      • OS:
      • WinXP32 Pro SP3
    ThugsRook's Avatar
    Join Date
    May 2003
    Location
    FLA
    Posts
    4,179
    Country:
    Users Country Flag

    Default

    i forget what your desk looks like ~ got a pic?

    can you remove the right underside (support?) of the desk and just mount that side to the wall or something? hehe~

  15. #15
    Administrator
    • Mikki's Rig Specs
      • Motherboard:
      • ASUS P4C800-E Deluxe Rev. 2.0 BIOS 1016
      • CPU:
      • iNTEL Pentium 4 Extreme Edition 3.4 GHz ES @ 3.5 GHz (269x13) 1.6 V
      • memory:
      • 2 x 512 MB OCZ EL PC-3500 Dual Channel Platinum Ltd. Ed. (BH-5) @ 215 MHz 2-2-2-5 2.85 V
      • graphics:
      • Connect3D ATi All-in-Wonder X800XT @ 567/550 MHz cooled with Zalman FS-V7
      • PSU:
      • Zalman ZM400B-APS
      • Hard drives:
      • 30g POS
    Mikki's Avatar
    Join Date
    May 2003
    Location
    A Padded Room
    Posts
    4,862
    Country:
    Users Country Flag

    Default

    THis is an older one, but you can see what it's like. The desk is actually 2 pieces, you can see the 2nd piece on the right with the wheels on it. In order for me not to have to reach across the room to get at the front of the case, I had the tower between the 2 pieces. I've looked at it before to see if I could dismantle it a bit to make it more accessable and that's a big fat no...


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •