+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: 8800GTX VMOD Guide!!

  1. #1


    Join Date
    Oct 2004
    Posts
    942
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default 8800GTX VMOD Guide!!

    500 OHM VR for VGPU
    2x 1k VR's in Parallel '25-50 turns of precision'
    and
    25k OHM VR for VDDR

    For grounds use one of the grounds from PCI-E power

    VGPU



    VDDR



    Read Points


    CARD
    Last edited by MickeyMouse; 12-07-2006 at 09:55 PM.

  2. #2
    Front Side What?
    • FireDancer's Rig Specs
      • Motherboard:
      • Evga 680I
      • CPU:
      • Intel X6800 Extreme
      • CPU clock:
      • @ Stock
      • memory:
      • OCZ DDR2 PC 1000 Plats
      • graphics:
      • Evga 8800GTX
      • PSU:
      • Enermax 1000W SLI
      • Hard drives:
      • 2x 150 gig Raptors @ 10,000 rpm
    FireDancer's Avatar
    Join Date
    Sep 2004
    Location
    Marion KY
    Posts
    636
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Is that hammer to pound the card back in once the mod is done???? LOL
    Best Regards,
    FIREDANCER

    Success Is A Journey, Not A Destination
    "Life isn't about waiting for the storm to pass...it's about learning to dance in the rain."


    The BE BlackList

    Traders To Avoid

    TrollHunters.com

  3. #3

    • bf2nut's Rig Specs
      • Motherboard:
      • biosatr 965pt
      • CPU:
      • intel e6600
      • CPU clock:
      • 3.24 gig 1.35 stock volts
      • memory:
      • 4 gigs gskil micron d9 800
      • graphics:
      • evga 8800gtX!
      • PSU:
      • Silverstone ST85ZF ATX12V/ EPS12V 850W Power Supply
      • Hard drives:
      • single raptor-x 150 gig
      • OS:
      • XP PRO\SP2
    bf2nut's Avatar
    Join Date
    Apr 2006
    Location
    earth
    Posts
    1,343
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by FireDancer View Post
    Is that hammer to pound the card back in once the mod is done???? LOL
    nice pictures(good quality camera )how did it turnout?u do very good work btw man.i would bash my self in the head with that hammer if tried this and it wigged out while i was gaming

  4. #4
    FS/FT Mod(ding Junkie) shimmishim's Avatar
    Join Date
    Jun 2003
    Location
    Knoxville, TN
    Posts
    2,365
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    are you sure it's parallel?

    it looks like series to me.

    edit: my bad...

    looking at the VR's again, i see that they are setup in parallel!

  5. #5
    Raisinets RULE!!!
    • joeMan's Rig Specs
      • Motherboard:
      • eVGA 122-M2-NF59-TR
      • CPU:
      • AM2 6400+ 3.2GHz
      • memory:
      • 4GB (2x2GB) Patriot 6400
      • graphics:
      • eVGA 7950GT 512MB x2 SLi
      • PSU:
      • Silverstone SST-ST85ZF
      • Hard drives:
      • Seagate 160GB x2 RAID0
      • OS:
      • XP Pro x64
    joeMan's Avatar
    Join Date
    Jun 2004
    Location
    Sacramento, CA
    Posts
    3,416
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Nice work indeed.
    Quote Originally Posted by FireDancer View Post
    Is that hammer to pound the card back in once the mod is done???? LOL

  6. #6


    Join Date
    Oct 2004
    Posts
    942
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    this card was for stevehat1 on stock air hes doing around 700/1100 atm wiht vr's still at min setting prob 760/1200 when at max voltage on the air cooling he runs not bad from the 560/1000 stock clocks

  7. #7
    BE Member
    Join Date
    Sep 2005
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by jason57570 View Post
    this card was for stevehat1 on stock air hes doing around 700/1100 atm wiht vr's still at min setting prob 760/1200 when at max voltage on the air cooling he runs not bad from the 560/1000 stock clocks
    This card is a monster lol. Got in a '01 run @710/1125 on stock air only, no extra fans, and with vr's still at minimum. Think that is about all the GPU is going to do without more V. The mem may still have some left before I have to increase V. 71701

    Nice work on the card J!

  8. #8


    Join Date
    Oct 2004
    Posts
    942
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    looking great M8 awsome clocking and awsome 01

  9. #9
    BE Member
    Join Date
    Sep 2005
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Think I found about the max. for the card in '06 without turning up the vr's. 693/1150.
    13429 which appears to be an all air cooled dual core/single card WR.

  10. #10

    • bf2nut's Rig Specs
      • Motherboard:
      • biosatr 965pt
      • CPU:
      • intel e6600
      • CPU clock:
      • 3.24 gig 1.35 stock volts
      • memory:
      • 4 gigs gskil micron d9 800
      • graphics:
      • evga 8800gtX!
      • PSU:
      • Silverstone ST85ZF ATX12V/ EPS12V 850W Power Supply
      • Hard drives:
      • single raptor-x 150 gig
      • OS:
      • XP PRO\SP2
    bf2nut's Avatar
    Join Date
    Apr 2006
    Location
    earth
    Posts
    1,343
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    wow thats amazing man.even tho the cpu is a conroe at 4.0ghz thats still mind blowing.how stable is it at hours of gaming?no artifacts at all?temps seem sane?

    good job..wow!

  11. #11
    BE Member
    Join Date
    Sep 2005
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Strictly for benching at those clocks

  12. #12

    • bf2nut's Rig Specs
      • Motherboard:
      • biosatr 965pt
      • CPU:
      • intel e6600
      • CPU clock:
      • 3.24 gig 1.35 stock volts
      • memory:
      • 4 gigs gskil micron d9 800
      • graphics:
      • evga 8800gtX!
      • PSU:
      • Silverstone ST85ZF ATX12V/ EPS12V 850W Power Supply
      • Hard drives:
      • single raptor-x 150 gig
      • OS:
      • XP PRO\SP2
    bf2nut's Avatar
    Join Date
    Apr 2006
    Location
    earth
    Posts
    1,343
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by stevehat1 View Post
    Strictly for benching at those clocks
    heh thought so ,steve fill out the rest of your pc specs

  13. #13
    BE Member
    Join Date
    Sep 2005
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Quote Originally Posted by MickeyMouse View Post
    this card was for stevehat1 on stock air hes doing around 700/1100 atm wiht vr's still at min setting prob 760/1200 when at max voltage on the air cooling he runs not bad from the 560/1000 stock clocks

    Sneaking up on the 760/1200
    Here's a 72767 '01 score at 740/1183. 1.48VGPU and 2.15vddr. Details in project description....

    What do ya think J, had the card over a month and haven't knocked the mods off yet. ROFL

  14. #14


    Join Date
    Oct 2004
    Posts
    942
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    I think your wasting time, lol next gen cards will be out before oyu push that one

  15. #15
    BE Member
    Join Date
    Sep 2005
    Posts
    30
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Well I am a little slow and methodical.....

    Is this going to be short lived like the 7800GTX 512?

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts