Voltage, again fooled with RAM timings to no avail.
Voltage, again fooled with RAM timings to no avail.
Volts
There must be 0.001 seconds in there somewhere Pete.
Thought You'd never ask, MORE VOLTS!
Awe.... You had that already.
Thanks Johnny, thought I killed it shortly after that.Wouldn't post, clearing the CMOS got it back though. Ticks me off how WZ's time (9.75) beats mine at lower MHz though....
He was on an X38, & he had the memory running faster.
The X38 is a faster chip, but if you speed up your memory frequency, the extra CPU speed might make up the difference
Good job JL
Johnny is right, can you run your memory at 2:3 or 4:5 or whatever is available to speed it up? Your ram should be good for it, even if you have to run 5-5-5-15 it should help. 1M likes raw mhz
Tried to run the RAM faster but without going 2.5 on volts on it I get errors in Pi. With the 2.5 volts it won't match the runs I got at the lower speeds.
Last edited by Just Learnin'; 07-25-2008 at 08:10 PM.
How much faster? That gskill hz should be good for well over 1200mhz easily.... you may have to loosen up some subtimings, but I don't think that would hurt if you can run it fast enough.....I'd think 1300mhz should be doable with that ram.
At 1270MHz I need 2.5V barely stable, the best speed I can get near to that is 1058MHz. My CPU or board is maxed on air at 4.76MHz (529 FSB) any more and it is clear CMOS time, no post.
My P5K was like that, on air it had a hard wall at 550fsb.... once I put it on dice it took off and would boot at 600fsb, hard telling how high it would have ran ..... if I hadn't killed the 8400
This Team ram I have will run a little over 1200mhz with 4-4-4-12 with 2.5v and I've had it to 1300 with 5-5-5-15, thats as high as I tested, but it wasn't maxed out yet. I sent one set of it to shimmishim to try out, haven't heard how he's making out yet.
Originally Posted by boshuter
My P5K was like that, on air it had a hard wall at 550fsb.... once I put it on dice it took off and would boot at 600fsb, hard telling how high it would have ran ..... if I hadn't killed the 8400
This Team ram I have will run a little over 1200mhz with 4-4-4-12 with 2.5v and I've had it to 1300 with 5-5-5-15, thats as high as I tested, but it wasn't maxed out yet. I sent one set of it to shimmishim to try out, haven't heard how he's making out yet.
Where the H is the Green with Envy Smiley????
SetFSB Version 2.1.69.2
4800MHz on AIR!
Posting Permissions
Reply With Quote
Bookmarks