Opteron 146 - CAB2E 0540 FPMW results

[eva2000]

Yes a new Opteron 146 CAB2E 0540FPMW

Cooled with Corsair Hydrocool 200 Water



System

Opteron 146 CAB2E 0540FPMW Corsair Hydrocool 200 Water cooled
DFI NF4 Ultra-D R.AD0 618-3 bios
1x BFG 7800GTX 77.72WHQL drivers
1x 160GB Seagate Barracuda 7200.7 SATA NCQ
Liteon 48x24x48x CD Burner
Floppy drive
510W PC Powercooling SLI psu

WinXP Pro SP2 - very old install left over from DFI NF4 SLI-D i had (haven't bothered to do a fresh reinstall yet)
NF4 6.53WHQL chipset drivers

Memtest86+ 1.55 from 618-3 bios

vcore - results

AUTO (1.4v) = 3000mhz - 4 full standard loops PASSED

1.425v = 3050mhz - 2 full standard loops PASSED

1.475v = 3100mhz - 8 full standard loops PASSED

1.5v = 3150mhz - 1 error on 1st pass of Test #4

So guess it's still one of the best cpus i've tested.

This is with very loose timings 2x 256MB Gskill PC4400LE TCCD 431 @282mhz 2.5-4-3-7 8-18-2223 on divider 180





Maxtcase = 65C with 10C offset

========================
Okay down to the nitty gritty stuff how's 3GHZ at near stock (1.4 + 4%)

2x 512MB Gskill PC4400LE TCCD 431
@300mhz 2.5-4-3-7 8-18-2223



and 8M @3160mhz at 1.616v

[MickeyMouse]

Now your just rubbing Salt in the wounds

[eva2000]

salt is good on chips

[eva2000]

2x 512MB Gskill PC4400LE TCCD 431
@282mhz 2.5-3-3-7 7-14-2222 on 180 divider



So far best 1M clock/time

[top game 22]

very nice.. i may tray for 3.. tonight @2.8 now..

[eva2000]

good luck

2800mhz at 1.312v


haven't tried lower vcore yet

if you don't see the image it might be due to me moving to a new server and domain propagation hasn't compeleted heh

[eva2000]

my high opteron clock and fastest opteron 32M so far

[onepagebook]

looks good to me by using divider

[eva2000]

Hey Kev fancy seeing ya here

Yes this cpu is a monster on 1/4" tubed Corsair hydrocool 200

Awesome broke 23m 10s barrier

Super Pi 32M

timings are getting loose on TCCD as i go higher on the dividers nearly had 3156mhz but errored out 3/4 of the way into 32M

@3102mhz = 23m 23.735s
@3120mhz = 23m 14.547s
@3130mhz = 23m 10.297s
@3133mhz = 23m 08.500s
@3141mhz = 23m 05.891s
@3150mhz = 23m 03.531s

[eva2000]

BH-5 vs TCCD

Well finally cracked 23m with winbond BH-5 ram and still have room to move As you can see from the times BH-5 was +20mhz faster equivalent at same clocks as TCCD i.e. 3102mhz BH-5 = 3120mhz TCCD

2x 512MB Corsair XMS3500C2v1.1 BH-5 on 166mhz divider

Super Pi 32M
@3000mhz at 1.44v = 24m 00.719s
@3102mhz at 1.536v = 23m 14.906s
@3120mhz at 1.536v = 23m 05.171s
@3141mhz at 1.568v = 22m 59.453s
@3150mhz at 1.616v = 22m 56.875s

vs

2x 512MB Gskill PC4400LE TCCD on 180mhz divider

Super Pi 32M

@3102mhz at 1.536v = 23m 23.735s
@3120mhz at 1.568v = 23m 14.547s
@3130mhz at 1.568v = 23m 10.297s
@3133mhz at 1.568v = 23m 08.500s
@3141mhz at 1.584v = 23m 05.891s
@3150mhz at 1.616v = 23m 03.531s

[solema]

Hey Guys,
I am new to this forum, and I just received an Opteron 146 CAB2E 0540FPMW as well. I was wondering what clocks you guys are getting on air cooling? I'm using a Zalman 7700Cu so it should be pretty good. Is anyone seeing these clock as well as the CABYE 0540's?