Announcement

Collapse
No announcement yet.

Post your current CPU and Overclock here

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Post your current CPU and Overclock here

    I'll go first obviously I have This CPU with these max stable settings on a Soltek SL-75FRN-L CPGeek tweaked 1.3L bios

  • #2
    I have an Iwill MPX2 with 2XP1700B's at 2.26gig 1.625V water cooled.If you want to know more i was thinking of a little review if enough interest.It's not a gaming rig so i just use an old TNT2Ultra for graphics but its awesome for video encodes etc..

    let me know if you want more info.

    Comment


    • #3
      Well you can count me as a yes vote for a review of that badboy

      Comment


      • #4
        here is a piccy.



        I'll get something together and post it for you..sandra scores are just silly so you should love it...

        Comment


        • #5
          looks awesome:eyepop: please post some benchies

          Comment


          • #6
            That's a sick setup BT! :yummy: Looking forward to the benchies excluding the 3D of course.

            Comment


            • #7
              Just put a 2500+ AQXDA 0313WPJW in my SL-75MRN-L and it's doin' 3200+ 200mhz synch on less than default voltage (actual) once I'm certain it's nuke proof I'll shoot for 2.4-2.5ghz. I'll have to leave it@200fsb though because it's just a extra boxen so I use the IGP on it and it doesn't like anything over 200 much though it'll handle 260mhz core now with the stock NB cooler+ Shin-Etsu.

              CPU-Z

              200 synch benchies using integrated G4MX@200mhz core

              3DMark2k1se=6001 w/IGP@260mhz core I'll post some more benchies (just for my own amusement :P ) for the CPU if it likes the extra speed and heat.

              Comment


              • #8
                2.31ghz still on less than default vcore actual and has been stress testing for a few hrs now without flinching. Looks Like this CPU is a winner I should be able to get 2.4-2.5ghz for certain if the temps stay exceptable by not having to pump much voltage through it but I think I'm gonna be staying where ever it peaks stable without touching the vcore.

                Comment


                • #9
                  Got a AXP 2500+/ASUS A7N8X DLX/Corsair TwinX 2700 256x2

                  Its running at 2192.4 with a FSB of 175 and at a multiplier of 12.5

                  Comment


                  • #10
                    2.3ghz is where it stays for now, 2.4ghz took another .1v and ABSII temp hit 60c F@H Gromacs load. I might get 2.5ghz on 1.85v but the heat and voltage isn't worth it so here I stay for now.

                    Comment


                    • #11
                      currently im benching with 1700tbreds as financing aint stretching to a new intel set up however tha pair i have at the moment are good ones cant wait to get a canterwoody setup... both below are prometeia cooled

                      does


                      and this one

                      does

                      Comment


                      • #12
                        Damn! That promie will really juice them suckers! I wouldn't recommend running that vcore for long usually but for what the 1700+ sells for I say full speed ahead and damn the torpedos!

                        Comment


                        • #13
                          always has been for both of em they will fold quite happily at 2.5ghz on air(alpha pal + standard 80mm case fan ) and with 2v going through em the guage on the front of the prommie doesent drop below -27 (or should i say higher )thats during a heavy benching session ... they have done 3d above 2.9ghz but at a lower fsb than normal so the extra cpu speed isnt taken full advantage of .... what i really need i thing is some nice fast high fsb capable mem ( currently corsair xms 3500 cas2 platinum )to really make these puppys sweat

                          Comment


                          • #14
                            My CPU

                            Athlon XP2500 with the following stepping:
                            AXDA2500DKV4D 9596378251020
                            AQUCA0307XPEW

                            Asus A7N8X Deluxe, Revision 2 with 1005 BIOS
                            1 GB of PalmTreePC PC3200 RAM with Winbond BH-5 chips
                            Antec Performance 2 Workstation Tower with the power supply that comes with that.
                            ThermalRight SK-7 heatsink with generic 70mm 4500 RPM fan.

                            I'm running the FSB at 200, and multiplier at 11, to get 2200 Mhz @ 1.750 volts. Ram is in sync @ 7-3-3-2.5

                            Comment


                            • #15
                              Hey Jeff! Good to see you here! They need more AMD lovin' around here

                              Comment

                              Working...
                              X