eva2000
08-31-2003, 08:28 AM
I was 3dmark benching this 9800NP when the power went out.. it happened twice! My 2 benching pcs are connected to the 1x Upsonic 500VA/300W Guardian UPS
I'm guessing i overloaded my UPS with the 9800NP oc'd ???
system is
P4 2.8C@3600mhz at 1.75v
P4C800-E Deluxe 1011 beta 6 bios
2x 512MB OCZ PC4000 Gold @257mhz 2.5-4-3-6 at 2.85v
9800NP @454/670
120GB WD 1200JB
MCX4000 + 120x38mm Sunon 120cfm fan
120x38mm Panaflo 103cfm fan over NB, mosfets and video card
edit: forgot using 520W Topower Gold dual fan psu with DMM rails solid at 12.13v for 12V, 5.13v for 5V and 3.42v for 3.3V
I'm guessing i overloaded my UPS with the 9800NP oc'd ???
system is
P4 2.8C@3600mhz at 1.75v
P4C800-E Deluxe 1011 beta 6 bios
2x 512MB OCZ PC4000 Gold @257mhz 2.5-4-3-6 at 2.85v
9800NP @454/670
120GB WD 1200JB
MCX4000 + 120x38mm Sunon 120cfm fan
120x38mm Panaflo 103cfm fan over NB, mosfets and video card
edit: forgot using 520W Topower Gold dual fan psu with DMM rails solid at 12.13v for 12V, 5.13v for 5V and 3.42v for 3.3V