4PCA3+ NB + 60x25mm 7000rpm 40cfm [pics]

[eva2000]

I had a 60x25mm Sunon 7000rpm 40cfm fan lying around and decided to see if it would be of any use as a NB fan :) What I found was the 60x60mm size was just right for the 4 motherboard hooks to pass some wires through to hold down the fan :D

More pics here (http://www.fileshosts.com/pentium4/D1/epox/4pca3+/nb_60mm/web/)

http://www.fileshosts.com/pentium4/D1/epox/4pca3+/nb_60mm/web/60mm_sunnon_02.JPG

http://www.fileshosts.com/pentium4/D1/epox/4pca3+/nb_60mm/web/60mm_sunnon_06.JPG

http://www.fileshosts.com/pentium4/D1/epox/4pca3+/nb_60mm/web/60mm_sunnon_13.JPG

http://www.fileshosts.com/pentium4/D1/epox/4pca3+/nb_60mm/web/60mm_sunnon_15.JPG

[dbwillis]

Interesting...

[ThugsRook]

be careful you dont pop those pins out of the board :look:

[XJ.]

7000rpm 60mm fan - that would give me a serious headache :eek2:

[eva2000]

Originally posted by ThugsRook
be careful you dont pop those pins out of the board :look: i hope not.. hehe

the fan doesn't seem that loud when you have 92mm 120cfm and 80mm 80cfm fans running :)

[XJ.]

LOL :rotflmao:

[eva2000]

well this fan is really helping keep the system temp down while under load it's no more than 2-3C above room temp