Post your current CPU and Overclock here

[DAPUNISHER]

I'll go first obviously :wave: I have This CPU (http://pichosting.pcthike.com/DAPUNISHER/xp2100) with these max stable settings (http://pichosting.pcthike.com/DAPUNISHER/CPUZ) on a Soltek SL-75FRN-L CPGeek tweaked 1.3L bios

[Tony]

I have an Iwill MPX2 with 2XP1700B's at 2.26gig 1.625V water cooled.If you want to know more i was thinking of a little review if enough interest.It's not a gaming rig so i just use an old TNT2Ultra for graphics but its awesome for video encodes etc..

let me know if you want more info.

[DAPUNISHER]

Well you can count me as a yes vote for a review of that badboy :)

[Tony]

here is a piccy.

http://homepage.ntlworld.com/ad.leach/dually/watercooling.JPG

I'll get something together and post it for you..sandra scores are just silly so you should love it...:)

[Flamer]

looks awesome:eyepop: please post some benchies:)

[DAPUNISHER]

That's a sick setup BT! :yummy: Looking forward to the benchies excluding the 3D of course.

[DAPUNISHER]

Just put a 2500+ AQXDA 0313WPJW in my SL-75MRN-L and it's doin' 3200+ 200mhz synch on less than default voltage (actual) once I'm certain it's nuke proof I'll shoot for 2.4-2.5ghz. I'll have to leave it@200fsb though because it's just a extra boxen so I use the IGP on it and it doesn't like anything over 200 much though it'll handle 260mhz core now with the stock NB cooler+ Shin-Etsu.

CPU-Z (http://pichosting.pcthike.com/DAPUNISHER/CPU_Z)

200 synch benchies using integrated G4MX@200mhz core (http://pichosting.pcthike.com/DAPUNISHER/Barton_200mhz_synch)

3DMark2k1se=6001 w/IGP@260mhz core (http://service.futuremark.com/compare?2k1=6558455) I'll post some more benchies (just for my own amusement :P ) for the CPU if it likes the extra speed and heat.

[DAPUNISHER]

2.31ghz (http://pichosting.pcthike.com/DAPUNISHER/barton2_31ghz) still on less than default vcore actual and has been stress testing for a few hrs now without flinching. Looks Like this CPU is a winner :D I should be able to get 2.4-2.5ghz for certain if the temps stay exceptable by not having to pump much voltage through it but I think I'm gonna be staying where ever it peaks stable without touching the vcore.

[caffeinated]

Got a AXP 2500+/ASUS A7N8X DLX/Corsair TwinX 2700 256x2

Its running at 2192.4 with a FSB of 175 and at a multiplier of 12.5

[DAPUNISHER]

2.3ghz is where it stays for now, 2.4ghz took another .1v and ABSII temp hit 60c F@H Gromacs load. I might get 2.5ghz on 1.85v but the heat and voltage isn't worth it so here I stay for now.

[majormav]

currently im benching with 1700tbreds as financing aint stretching to a new intel set up however tha pair i have at the moment are good ones cant wait to get a canterwoody setup... both below are prometeia cooled
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/DVC00050.JPG
does
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/2959.GIF

and this one
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/cpu2.JPG
does
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/2972cpuzgif.gif

[DAPUNISHER]

Damn! That promie will really juice them suckers!:eek: I wouldn't recommend running that vcore for long usually but for what the 1700+ sells for I say full speed ahead and damn the torpedos!:beer: :beer: :beer:

[majormav]

always has been for both of em they will fold quite happily at 2.5ghz on air(alpha pal + standard 80mm case fan ) and with 2v going through em the guage on the front of the prommie doesent drop below -27 (or should i say higher )thats during a heavy benching session ... they have done 3d above 2.9ghz but at a lower fsb than normal so the extra cpu speed isnt taken full advantage of .... what i really need i thing is some nice fast high fsb capable mem ( currently corsair xms 3500 cas2 platinum )to really make these puppys sweat

[Jeff7181]

Athlon XP2500 with the following stepping:
AXDA2500DKV4D 9596378251020
AQUCA0307XPEW

Asus A7N8X Deluxe, Revision 2 with 1005 BIOS
1 GB of PalmTreePC PC3200 RAM with Winbond BH-5 chips
Antec Performance 2 Workstation Tower with the power supply that comes with that.
ThermalRight SK-7 heatsink with generic 70mm 4500 RPM fan.

I'm running the FSB at 200, and multiplier at 11, to get 2200 Mhz @ 1.750 volts. Ram is in sync @ 7-3-3-2.5

[DAPUNISHER]

Hey Jeff! Good to see you here! They need more AMD lovin' around here :D

[pointreyes]

Originally posted by bigtoe
I have an Iwill MPX2 with 2XP1700B's at 2.26gig 1.625V water cooled.If you want to know more i was thinking of a little review if enough interest.It's not a gaming rig so i just use an old TNT2Ultra for graphics but its awesome for video encodes etc..

let me know if you want more info.

About a week after I built my IWill MPX2 system, IWill discontinued the board. :( My system has been rock solid stable. However I don't oc the system-sorry. Wish IWill didn't discontinue the board though. :mad:

I do however oc my Epox 8rda with an XP2100 to 2.1 Ghz at default vcore. I was attempting to oc my ASuS A7N8x Deluxe rev 2.0 with an XP2500 but due to a bios upgrade, the board is dead. :(

[Jeff7181]

Originally posted by DAPUNISHER
Hey Jeff! Good to see you here! They need more AMD lovin' around here :D
Thanks... looks like some good discussions go on here... and best of all, I haven't seen one flame! :)

[Jeff7181]

Originally posted by pointreyes
About a week after I built my IWill MPX2 system, IWill discontinued the board. :( My system has been rock solid stable. However I don't oc the system-sorry. Wish IWill didn't discontinue the board though. :mad:

I do however oc my Epox 8rda with an XP2100 to 2.1 Ghz at default vcore. I was attempting to oc my ASuS A7N8x Deluxe rev 2.0 with an XP2500 but due to a bios upgrade, the board is dead. :(
Alt+F2 doesn't work? :)

[pointreyes]

Originally posted by Jeff7181
Alt+F2 doesn't work? :)

OT: Sorry. :(
Nuthin works after the bios upgrade. Found out that this is nothing uncommon to have happen with this board (after the fact of purchasing it :rolleyes: ). The board powers up, no beeps, no display, no floppy seek. The board was working great for a week but I wanted the latest bios in case it would improve the memory throughput and maybe provide lower temp readings. Well, with that bios (not beta) took care of all those questions I had. :D I was going to exchange the board for another but now I'm wondering if I would be better getting a new bios chip to replace this one because a replacement board will probably have the same bad chip. :confused:

When are the nForce3 boards that support the Opterons coming out? I might have found a buyer for my Canterwood system, I'm just not that impressed with the P4 line-even if it is a HT proc. Replacing the Canterwood with an Opteron might be better for my needs.

[shimmishim]

2.5 ghz on water...

:)

0310x

[DivideBYZero]

Ahh, this is what AT is missing, PICS!

I love seeing ppl's rigs and it's cool for checking core markings and such.

[compudog]

Originally posted by DAPUNISHER
Hey Jeff! Good to see you here! They need more AMD lovin' around here :D


I agree - Good to CU here 2 DAPUNISHER!!!


cdog:wave:

[DAPUNISHER]

Wow, we are starting to get a good AMD crew going here now :cool: Shim, Jeff, you, DBZ, the crew from ABC <Monty Burns> excellent!

I have 2 1700+'s from the egg comin' so I'll post back how they do with moderate air cooling.....eventually :rotflmao:

[shimmishim]

come on!!! amd peeps represent!!!

i come visit here and it's so dead... somuch action going on in the intel forums!!!

:)

[majormav]

clocked mine already .... too warm at moment to do any benching :)

[Ilmater]

I've been having problems with my OC, though I can't figure out which part is the culprit. Right now I'm only running a 195MHz FSB, but it ran Prime95 all night long last night with an 11.5 multi (2243 MHz) at 1.75v (disregard sig, I'll update it shortly).

It's running 3DMark 01 with Prime95 in the background right now, and if it's running both when I get home, I'll bump it up again.

BTW, if anyone in here gets a chance, I'll be posting some strange problems I've had with my OC in the motherboard section in an hour or so. Please take a look and offer any suggestions you might have.

[compudog]

I have my Barton 2500+ at 2004 (166x12) with a lapped AMD Retail cooler. My memory doesn't like an FSB above 175. I had the CPU at 12.5 but it "felt" slower than 12. Probably the memory. I have yet to get my MCX. UPS tracking shows it at the same location since Friday! Grrrr. :look:

http://www.csctechnology.com/AT/OC1.JPG

[prometheus]

Barton 2500+ (1.83GHz real) at 2.45Ghz (3600+) at 1.725V on AIR. 223x11. Memory is at DDR446 at 2,5,3,2. Gigabyte 7N400 PRO.

http://home.rochester.rr.com/hessfink/cpuz2450.gifhttp://home.rochester.rr.com/hessfink/2450cpu.gif

The Silver is still setting up and I suspect I will be able to do 2.5GHz after some burn-in. Review of the 7N400 PRO is in process - followed by the DFI NF2 LanParty (Ultra 400) early next week.

[DAPUNISHER]

That's a sweetie you got there prometheus :cool: Looking forward to your reviews as well :)

Almost forgot! Those 2 1700+ B's ended up in Shuttle MN31N's I got for 60$ shipped from Directron during the promotional for them. No overclocking features except 1mhz increments for the FSB from 100-200mhz so I managed 185mhz synch stable using 2 256mb sticks of Crucial 2700DDR in DC-DDR and the IGP managed 5000+ in 3DMark2k1se. Sweetest thing about the MN31N is it has the MCP-T and using the Antec PerformanceII was able to take advantage of the IEEE1394 and USB2 so both systems were delivered with 6 USB2 and 1 firewire port. The Dolby Digital with PowerDVD sounds very good too.

[compudog]

http://www.csctechnology.com/AT/cpu1.jpg


Just by increasing the multiplier. I am not having any luck checking my temps. MBM 5.0 reads 32 degrees for every sensor and AsusProbe reads 40C all the time as well. I want to start adjusting the FSB but without some reliable method of reading temps I have to take it slow. Using AMD retail cooler that I lapped mirror smooth.

[shimmishim]

argh

wish my barton could do 2.45 on air!!!

mine only did 2.3 ghz on water and i sold it!! :)

but anyway

i've been tweaking away at my 1700+

and i've upped my fsb to 220 now with a mult of 11.5

so i'm up to 2535 with 1.81 vcore :)

woo hoo!

prime is going strong still

[DivideBYZero]

This is my 1700+ on an ABIT KG7:

[compudog]

Very nice /0!!! Not bad for a $43 CPU! :-)

[Chuck232]

Ahhh come on, lower that multiplier and shoot for a higher FSB! :D

[DivideBYZero]

Originally posted by Chuck232
Ahhh come on, lower that multiplier and shoot for a higher FSB! :D

The multiplier is hard wired to 15..... the KG7 was never supposed to breach 1.67Ghz so I'm pushing my luck here as it is!

Also I'm having lockups at around 145. I think it's a component issue due to the 4:4:1 divider (told you I was pushing it), so may be ripping PCI cards 'till I find the culprit.

The RAM is 2700 and I have POST'ed no probs at 150, but the 760 will crap out at arounf 155 AFAIK anyhow.

I'll be posting final MHz soon.....

[Chuck232]

Ohhh.. I guess I should read posts instead of assuming everyone has a nForce2..:o

[XJ.]

Abit NF7-S v2.0, HyperX PC3500(2x256MB), Barton 2500+:

Running 2.32Ghz, 11*210.5 @ 1.90v (rats, needs too much vCore!). I can push it up, but it maxes out at 2.4Ghz and 2.05v - and I don't want to run vCore that high. I was hoping for at least 2.4Ghz @ 1.95v (like my TBredB 2100+) but no go :(

[Chuck232]

Awww.. but I bet that gives you much better performance than your tbred-b at 2.4GHz...:yummy:

[XJ.]

Not any noticable difference....

Ozzie at ABX (I think it was him) had one running at 2.5Ghz and noticed that it was very snappy, guess that couple hundred extra megahertz makes a difference.

[Jeff7181]

Just got my new XP2500 today...

AXDA2500DKV4D Y850058250476
AQXEA 0324SPCW

Runs at 2.3 Ghz on 1.750 volts... I didn't try any higher... but it runs at 2.2 Ghz on stock (1.650) voltage... which is what I'm keeping it at, because under load it barely hits 50 at 2.2, and at 2.3 it goes up to 55. So as time goes by, if I need a boost, I can get another 100 Mhz out of it at least with a little added heat.

The extra 100 Mhz bumped my PCMark CPU score up to 7100 from 6800... 3DMark2001 up to 14,700 fromn 14,500. Didn't do any game testing. I'll save that for another day =)

[Chuck232]

Nice chip and o/c! :beer:

[Jeff7181]

I booted into Windows at 2.4 Ghz, and things ran find until I started Prime 95, then it locked up... didn't even error out, just locked up... but I only tried it at 1.775 volts. I POSTed at 2.5 Ghz, and booted into Windows, but it locked up when I logged in.

[mike11973]

http://forums.extremeoverclocking.com/attachment.php?attachmentid=32241
http://forums.extremeoverclocking.com/showthread.php?p=923600#post923600

same name on other forum.

[Jeff7181]

I got my NEW processor not too long ago. Mobile XP2500 like the previous poster. Right now I'm running 2.4 Ghz on 1.65 volts... waiting for my TruePower 430 to go higher cause the voltages are all over the place at 2.5 Ghz, even though I was able to complete benchmarks at that speed.

[sodface]

The multiplier is hard wired to 15..... the KG7 was never supposed to breach 1.67Ghz so I'm pushing my luck here as it is!


I still have a KG7 (non-raid) alive and kicking as well. I have an 1800+ in it at the moment and haven't even messed with it. How have these done compared to the 1700's?

Holy crap, I was only 8 months late on that post :o

[jason]

Moderators Note: Jason although you have a very nice OC with your chip and some wonderful information to share, this is an AMD forum...so your post is OT and has been removed; please post it in the proper forum (Intel Processors) we'd love to read about it over there:thumbs:...Paragon

[RootX]

2.8c(m.o) @ 3.8
U've got a hell of an AMD cpu m8, :D

Ok, mine is:
ADA3400AEP5AP
CAAOC 0352TPMW

stable @ 2.82GHz, 1.84Vcore, cooled by MachII 404-mod.
max post, 3.02GHz.

[Phoenixofwater]

I have 1700+ runing at 2Ghz(2400+) 12 X 167
and 2500+ at 2.2Ghz(3200+) 11 X 200

As soon as I sell some of my stuff i'll get a AMD 64!! :thumbs:

[Garnet]

2500+ mobile @ 2375 mhz. 1.06 A7N8X Deluxe, 1 gb PC3500 EL OCZ. Cooled with Vantec Aeroflo.

[liteoncrasher]

Nothing major:

AMD Athlon XP 2400+ (133x15) to AMD Athlon XP 2600+ (166x12.5)

Looking for a new board so I can go (166x13.5) or (166x14).... Any ideas?

[footman]

Moderators Note: footman although you have a very nice OC with your chip and some wonderful information to share this is an AMD forum...so your post is OT and has been removed; please post it in the proper forum (Intel Processors) we'd love to read about it over there:thumbs:...Paragon

[Rukee]

I have a crappy locked xp2500 @ 228mhz 1.95v.

[Anomaly2200]

STATS

[Pointhore]

Isnt this an AMD topic forum? :shhh: :yup:

[Paragon]

Isnt this an AMD topic forum? :shhh: :yup:

Thanks for calling our attention to this Pointhore :rock: Sorry we didn't catch it earlier :thumbs:

[Garnet]

I just added another Athlon to my mix. A 2100+ @ 2200mhz, 11 x 200, Soltek 75FRN2-L NFORCE2, 2 x 256 OCZ EL 3500.

[shimmishim]

AXP-barton mobile 2500+ @ 2.6 ghz @ 1.85 volts all on air cooler (ALX800 with TTSF2)

i had to back it down cuz it got up to 90 here today :(

[sierra_bound]

Watercooled FX51. Not the highest I've run it, but this is the most stable speed.

http://img13.photobucket.com/albums/v38/ds7510/Super_pi_2.jpg

[sierra_bound]

Here's CPU-Z

http://img13.photobucket.com/albums/v38/ds7510/225X11.jpg

And the best of Super_pi

http://img13.photobucket.com/albums/v38/ds7510/Super_pi_total.jpg

[nutcase]

This is the best I have Done.. Xp1700+ DLT3C Under Pase Change (Mach 1) and DFI Ultra Infinity....

Not fully stable But will boot to windows and run Low priority Programs

[Gaspar]

Currently running a 3c Sl6wu @ 3.9ghz 260fsb 1.675v watercooled

[Paragon]

WTG Gaspar...Nice OC bud :thumbs: :beer: :thumbs:

[Garnet]

Currently running a 3c Sl6wu @ 3.9ghz 260fsb 1.675v watercooled

Nice overclock Gaspar! :thumbs: You wouldn't be trying to rub us AMD'ers the wrong way by posting it in the AMD section.....now would ya? :lol:

[Gaspar]

Sorry Garnet my bad, I must have amd envy :chit:

[thesaucier]

3000+ at 13 X 220 with Nf7 @ 2860 MHz game stable!! :thumbs:

[shimmishim]

nice! what voltage is that at?

i'm hoping to get my 35w 2400+ or 45w 2500+ to 2.9+ ghz on my prommy as soon as i get my mounting kit.

[thesaucier]

vcore at 2.14

[thesaucier]

I can get it to 2900MHZ but I cant get it game stable. :cry:

[Slagathor]

NF7-s rev 1 AMD 2500 Mobile Barton@2400mhz 12x200, 1.8 Vcore, modified CPU fan, Volcano 11, 27°C load temps currently.
1024 megs ram, 2x256 Crucial PC2700 1x512 Mishkin Level 2 PC2700 400mhz DDR, 2.5-3-3-9, 2.?? volts (max bios allows)

[jhatfie]

Hello. First post here.

I am running a watercooled A64 3000+ (CAAOC) at 2500mhz (250x10) and 1.74v on a Shuttle AN50R for my main gaming rig and a XP2100+ @ 2357 (205x11.5) @1.675v on a Epox 8RDA+ for my backup/filestorage/encoding rig.

[DAPUNISHER]

My CPUs now are a A64@3700+ AN50R (no mods) and a 2400+ t-bred B@2700+ Shuttle SN45G SFF.

[Battleweary]

I've got my 2500 mobile at 12x205 for 2460MHz@1.675 Volts. 205 is the max fsb I can get out of my OCZ PC3200 R3. I tried it at 12.5 at 1.7 Volts, but it wasn't stable. I don't want to volt it any higher than that because it runs to hot for my liking. :thumb:

Battle.

[Ju57in]

vcore at 2.14

i'll be impressed if that chip sees christmas.

[Justiceman]

mobile 2500 @ 12 x 200 2400 1.7 volts on a DFI lanparty board

[yourdeardaniel]

P4 2.8C (30 cap) at 3.5ghz default voltage, stock intel hsf. highest overclock i can get with default voltage

[X-GeN]

2.8c SL6Z5 (30 caps, M0) = default vcore 3.5ghz and 1.6 vcore 3.71ghz.
Didn't accept vcore over 1.6v :( When ever I give over 1.6v bios crashes. (Done with Zalman 7000 Al-Cu)

3.0c SL6WU (30 caps, D1) = default vcore 3.8ghz and 1.75 vcore 4.0ghz :D (Done with Cooler Master Aquagate)

[ceegee]

A7N8x amd 2500+ 11*200 stable vcore 1.65 air cooled elite ddr400 memory sync but only single channel, mem refuses to run dual :( it a locked cpu but hey i am happy!

[sierra_bound]

FX53 @ 3027MHz (233X13)

http://img.photobucket.com/albums/v38/ds7510/SuperPi233X123027MHz.jpg

[AcUaViVa]

3500+ 939 at 250x9,5 1.55vcore
with a A8V deluxe wirless edition 1.02

( any mode to push up the vcore to 1,6 without mods? thanks)

[Phoenixofwater]

3200+ 1Mb 754 at 2.2Ghz (9X245) with default voltage on MSI K8N Neo2 Platinum

Going to up the volt and see if i can get 9X250 :chit:

[sierra_bound]

Did some tweaking

http://img.photobucket.com/albums/v38/ds7510/SuperPi253X12.jpg

[Tbone]

AMD64 3000+@2520MHZ (315*8)@1,5V
MSI K8N Neo Plat
2*256MB OCZ PC3500EB@252@2,7V@CL3-2-3-5
Radeon 9800Pro
watercooled

[Jeff7181]

Guess I haven't posted my most recent speed.
2.48 GHz (216x11.5) @ 1.76 (as read by MBM) cooled with a Thermalright SK-7 and 80mm Panaflo fan (3500 RPM I believe)
Mobile XP2500 with Mushkin PC3500 (2x512) on an A7N8X Deluxe

[faruquehabib]

a64 3200+ NC @ 2550mhz stock voltage, timings, stock amd hsf, etc...
asus k8v se deluxe
2x512 corsair value select 8-3-3-2.5 :D
actually a very solid rig for my backup to FURY

[Rukee]

239x11 2629MHz (24\7 folding)
265x11 2915MHz (benching)
a3500
1.45v
A8V Deluxe
OCZ PC3500EB
Vapochill PE @ -20.0c under full load

[Gaspar]

3C Sl6WU@ 3.9ghz 260 fsb 1.65v watercooled

[Kev_Dawg]

Athlon xp 3200+ 512 L2 cache stock settings not overclocked yet hehe...

[PaternityTest]

3000+ newcastle @2600mhz

[Ice]

3.0c (SL6WU) @ 3.84 GHz (256 FSB) 1.6v.

[Electric Bill]

See my sig.
This was on the DFI and was not Prime stable for more than 5 min but the stuff in my sig was for over 12 hrs.

http://ebill.home.att.net/NFIIB/YES_9x262.gif

Bill

[charbroil]

DFI Lanparty NF2 (Warmod) modded 5/5 bios
Buffalo PC3200 CH-5 (2 x 256MB) 11-2-2-2-2
240*10= 2520MHz
Vcore=1.85, Vdimm=3.2, AGP=Auto
eVGA 6800 LE (450/1250) Thugsrock GT bios
Antec 550W PSU
Audigy 2 Platinum
---ON AIR--- :D

[hey]

Albatron KX18Ds pro
2x512 PNY pc3500ram 3-4-4-8 (blech)
12x210 : 2520mhz
Vcore 1.675v Vdimm 2.7v Auto ram:fsb
2600 Barton Mobile AQYHA stepping
9800 flashed to pro @ (I forget what speed!) (like 17.6k 3D-01)
Coolmax 400w with <2% V variance
Alpha SPAL-8055 + Ceramique

Online gaming (Planetside) I drop it down to 2.31, but all benchmarks it passes, as well as MW4, Far Cry, and Tribes Vengeance-Planetside code is bugridden, and with clientside hit detection, its very picky with how OC stability sits. My NF7 could hit 2.6 on air using a DP-102, but refused to play 'fair' in that game- not running over 2.2 without issues during heavy gaming

CPU cost $88 a few months ago, Albie mobo was $63. Heatsink was $30... Lotsa bang for the buck. This system kix sand in the face of my NF7 stability-wise. The surprising thing- that Albatron mobo uses strictly the 20pin molex, there's no spot for the 12v 4-pin adaptor. This might be a great choice for somebody using an older psu pre-P4 adaptor wishing to get their feet wet with overclocking.

[Plavix]

My system specs and some screenies hope I am not ebarased :o first benchies!

AMD XP-M2500 IQYHA...
DFI LanParty nF2 Ultra B (10/15 modded bios)
ThermalTake Tower112 HeatPipe c/w 80mm Dc Smart fan *AS5
Thermaltake 480W PurePower PSU
*TwinMoss PC3200/DDR400 Cas 2.5
nVidia GeForce FX5700LE 256MMb (OC x 50%)
80GB Maxtor HDD
Sony Optical drives
ThermallTake Tsunami Dream Case c/w Cooling Fans

Screenies...

http://img154.exs.cx/img154/2192/XP-M250027GHz.jpg
http://img154.exs.cx/img154/2586/Prime95271GHz.jpg

I stopped Prime95 to d capture but I have ran cont..for3-4 days no probs!
This is my work horse system as I am currently fathoming out my A64 939 but not quite ready as only got it 2.7G so far!

May the darkness lead to light........

DarkForce :coocoo:

[top game 22]

nice man hears my rig. still working on the oc prime stable @2.5
http://

[dr_froth]

Currently running:

Board: MSI Neo2 Plat Bios 1.3
Processor: Athlon64 3200 skt939 90nm Stepping ADA3200DIK4BI CBBID Week 0446TPAW
Core speed: 2700Mhz
Vcore: 1.64
Multiplier: 10
HTT: 270
HTT Multiplier: 4
Memory used: OCZ 3200EL plat rev2 (Samsung TCCD)
Memory speed:270mhz Dual channel using a 1:1 divider
Vdimm 2.85v
Timings: 2.5,3,3,11 1T 7584Mb/s sisoft sandra
Stability level: 12hr Battlefield Vietnam stable, also prime95 for a few hrs
(Prime95 is a vicious test).......Memtest86+ PASS
Air cooled with 92mm fan

Currently Testing/burning in 275mhz x 10 1:1

[Ice]

Specs in sig...

http://www.abxzone.com/forums/attachment.php?attachmentid=14944

[insaneman37]

I'm ashamed to say it, but my 3400+ is at stock speed, and will remain that way.

However, I've previously had a 2500+, unfortunately one of the locked ones, that would do 220FSB on stock voltage. :D

I also had a 2100+ that I got to 12x216, completely stable. 2592mhz. It upset me that I never was able to hit the 2600mhz mark and be stable. I had the voltage maxed out on my NF7-S rev. 2, and since it undervolts, it was only a little over 2v at max.

[Gaspar]

Cpu AMD64 3500+ winchester
speed 243x11 2.67ghz Ht4x 1.65v
Ram Mushkin Lev2 3500 486 2 3 3 7 3.3 volts

[Plavix]

Here is my Athlon 64 3200 Winchester specifications as Sig..

This is the stable 2.6G but have had 2.7G but not safe so in the process of going Water/TEC combined Extreme cooling and awaiting the NEW "DFI nF4 SLI"!!

http://img144.exs.cx/img144/9180/Mothow26GHz-1.jpg
http://http://img77.exs.cx/img77/541/Mothow26GHz-2.jpg

Forever aiming for the distant light...... :rock:

[DeNs]

Man it's great looking back and seeing what the setups were like not in the too distant past.

I've already done some minor OCing with my new Winchester 3200+, but i'm waiting until I get my OCZ 3200EL TCCD next week. Since i'm getting it second hand off someone that has experience in running it in the same board as i'll be using it in (Neo2) i'm pretty much guarunteed to get the same results that he got with it.

mmmm 295MHz 2.5-3-3-7....

Well i'll post back next week with the results of it. Can't wait :)

---dens

[guiltyj]

OK, I built this rig specifically to venture into the arcane world of overclocking:

AMD Athlon 64 3200+ DTR w/ CG stepping (Clawhammer core)
220 HTT x4 w/ 10x multy=2200 MHz at 1.70 Vcore
Thermalright SLK948U heatsink
ASUS K8N-E Deluxe
Thermaltake W0011+PFC 480W PSU
WD Raptor 74GB 10K rpm SATA HDD
OCZ EL Plat Rev2 2x512MB, running @ DDR440/PC-3520 @ 2.7 Vdimm (2-2-2-7)
ATI Radeon 9800Pro 256bit/256 MB, flashmodded to 9800 XT
Windows XP SP2 most current, 3 case cooling fans, STABLE

But I am disappointed- I am using the standard 10% OC built into the latest BIOS version, but if I increase the HTT even 1 unit at the 10x multiplier, it won't boot. I figured the Athlon 64 was a bit more overclockable... <sigh> don't think heat is an issue, never breaks 45 degrees C

How can I get a higher CPU frequency? I want at least 2500 MHz...

[guiltyj]

OK, I am an idiot. It turns out that if you set the BIOS to lock AGP at 66 MHz, it doesn't. I set it to 66, the lowest, and then OC'ed from 200 to 220 HTT, but this OC'ed the AGP from 66 to 78. Any HTT higher would not boot.

But if you set it to 67, it locks at 66 post-boot. Wierd.... It is stable across the whole range from 67 to 75 MHz, but will not lock at 66 (in the BIOS; if you set BIOS to 67, it will report 66 in XP w/ utilities).

Anyway, here's my rig now, running Far Cry stable at 2500 MHz:

AMD Athlon 64 3200+ DTR w/ CG stepping (Clawhammer core)
Thermalright SLK948U HSF
ASUS K8N-E Deluxe
Thermaltake W0011+PFC 480W PSU
WD Raptor 74GB 10K rpm SATA HDD
OCZ EL Plat Rev2 2x512MB PC3200 (DDR400)
ATI Radeon 9800Pro 256bit/256 MB, flashmodded to 9800 XT
---------------------------------------------------------
Actic Cooling ATI silencer 3
BenQ FP931 19" LCD, 1280x1024 native
Samsung 16X DVD±RW
Creative Inspire 7.1 Surround Sound (92 Watts RMS)
Windows XP SP2, 3 case cooling fans
OCZ Ultra 5+ Thermal Compound used for all cooling
---------------------------------------------------------
OC: 10x250 (HTT) = 2500 MHz w/ HT multiplier = 3x
memory speed/timings: DDR500/PC4000 at 2.5-3-3-7
Mem divider: none, 1T
AGP lock: 75 MHz (BIOS max)
vcore: 1.75 (BIOS max)
vdimm: 2.7 (BIOS max)
vAGP: 1.7 (BIOS max)

[Ice]

OK, I am an idiot. It turns out that if you set the BIOS to lock AGP at 66 MHz, it doesn't. I set it to 66, the lowest, and then OC'ed from 200 to 220 HTT, but this OC'ed the AGP from 66 to 78. Any HTT higher would not boot.

But if you set it to 67, it locks at 66 post-boot. Wierd.... It is stable across the whole range from 67 to 75 MHz, but will not lock at 66 (in the BIOS; if you set BIOS to 67, it will report 66 in XP w/ utilities).

Anyway, here's my rig now, running Far Cry stable at 2500 MHz:

AMD Athlon 64 3200+ DTR w/ CG stepping (Clawhammer core)
Thermalright SLK948U HSF
ASUS K8N-E Deluxe
Thermaltake W0011+PFC 480W PSU
WD Raptor 74GB 10K rpm SATA HDD
OCZ EL Plat Rev2 2x512MB PC3200 (DDR400)
ATI Radeon 9800Pro 256bit/256 MB, flashmodded to 9800 XT
---------------------------------------------------------
Actic Cooling ATI silencer 3
BenQ FP931 19" LCD, 1280x1024 native
Samsung 16X DVD±RW
Creative Inspire 7.1 Surround Sound (92 Watts RMS)
Windows XP SP2, 3 case cooling fans
OCZ Ultra 5+ Thermal Compound used for all cooling
---------------------------------------------------------
OC: 10x250 (HTT) = 2500 MHz w/ HT multiplier = 3x
memory speed/timings: DDR500/PC4000 at 2.5-3-3-7
Mem divider: none, 1T
AGP lock: 75 MHz (BIOS max)
vcore: 1.75 (BIOS max)
vdimm: 2.7 (BIOS max)
vAGP: 1.7 (BIOS max)

Sounds like there's a bug with that board. Do you have the latest BIOS?

[83racecrew]

Not necessarily a bug, I have read about a few boards that do just that....you have to set it at 67 to prevent overclocking the AGP bus. :)

[joeMan]

FX-55 @ 208x13 for 2.7GHz auto voltage
3-3-3-8 1T 2.8vDimm.
No locks
HTT x5 (1000)
All benches run stable, but one exception: Prime95 gives rounding error anywhere between 1hr. - 5hrs.
HL2 stable

[guiltyj]

FX-55 @ 208x13 for 2.7GHz auto voltage
3-3-3-8 1T 2.8vDimm.
No locks
HTT x5 (1000)
All benches run stable, but one exception: Prime95 gives rounding error anywhere between 1hr. - 5hrs.
HL2 stable

"stable"- is that a joke? The FX-55 runs stock at 2.6 GHz, so your overclock is 4%. Good thing you have water cooling, otherwise your box might explode.

just kidding :)


Not necessarily a bug, I have read about a few boards that do just that....you have to set it at 67 to prevent overclocking the AGP bus. :)

@83racecrew: that's what I had to do, although now I set it at the max of 75, and it works fine... I do have the latest BIOS, but I wouldn't mind a newer version that allows for higher vcore (maybe vdimm too)

[83racecrew]

You set your AGP speed to 75?? :yikes: Not the best way to make your Video card live long.

[guiltyj]

uh, is that bad? I don't want to kill the card, I just want to enhance performance...

How come I hear about people running the 9800's at like 430, or 440, up to 500 MHz core, but if I use ATItool to up it past 420, I get major artifacts???

Is it useful to flash it w/ a hacked BIOS for improved performance?

I want to up the performance w/out jeopardizing the hardware (too much)

[Ice]

uh, is that bad? I don't want to kill the card, I just want to enhance performance...

How come I hear about people running the 9800's at like 430, or 440, up to 500 MHz core, but if I use ATItool to up it past 420, I get major artifacts???

Is it useful to flash it w/ a hacked BIOS for improved performance?

I want to up the performance w/out jeopardizing the hardware (too much)

Some cards just overclock better than others. It's luck of the draw. It also depends on what you're cooling it with. Are you using the stock cooler? Try reapplying some AS5 on the core.

[83racecrew]

That's the core speed of the card guiltyj, they are not overclocking the AGP bus...IMO you should leave it at 67 to lock it.

Better yet, post a thread down in the Graphics forum, most of the local Vid Card Guru's hang out down there :thumbs: ;)

[guiltyj]

no way dude, I used OCZ Ultra+ w/ an Arctic Silencer 3 on that biznatch, but it runs (per ATItool) about 60 deg w/out load, is that normal? Or should I reseat the Silencer 3?

@racer83: hmm, for a while I was running a std. 10% OC w/ the AGP set to 66, or so I thought- turns out it didn't lock and was OC'ed to 78, and I was using it like this for at least a week, playing Far Cry and Doom 3 like a madman...

what is effect of AGP at too high a freq? I mean, to the hardware itself?

[Ice]

no way dude, I used OCZ Ultra+ w/ an Arctic Silencer 3 on that biznatch, but it runs (per ATItool) about 60 deg w/out load, is that normal? Or should I reseat the Silencer 3?

Wow, 60C at idle? That's pretty hot and it's not even a 6800GT/Ultra. Your temps should be in the 40's. I'd say clean off all the thermal compound and reapply a fresh, thin layer on the core and then check temps again.

[83racecrew]

Guiltyj, I edited my post....see above :)

[joeMan]

I put stable on there because I have had a heck of a time getting anything stable with the 2 x 1GB setup. I am thrilled to finally be getting 2.7GHz.

[mike11973]

http://img44.exs.cx/img44/4964/newscreen7yd.th.jpg (http://img44.exs.cx/my.php?loc=img44&image=newscreen7yd.jpg)

[mike11973]

I put stable on there because I have had a heck of a time getting anything stable with the 2 x 1GB setup. I am thrilled to finally be getting 2.7GHz.

nice system....with an fx-55 you should be able to o/c higher than that pretty easily...i've seen that processor as high as 3417ghz

[mike11973]

oops...3417mghz or 3.4ghz

[shimmishim]

3.4 ghz isn't with your typical air cooling.

i think close to 2.9 to 3 is possible with air.

cascade/phase change is required for 3.4

[guiltyj]

I got a 25% OC pretty easy w/ my non-FX AMD 64 3200+; and that's on air (but not stock);

I had probs at first but that was before I locked my AGP at 66 (by setting BIOS to 67; setting BIOS to 66 didn't lock it for some wierd reason).

Assuming the FX is at least as overclockable, you should be able to get at least 3200 MHz, AT LEAST, on decent air... just be sure to loosen up the mem timings (you should still be able to get 1T divide) and lock the AGP

[zakee00]

see sig :D
14hr prime stable, until i stopped it

[RyderOCZ]

:welcome: to the BE Zakee :wave:

May I ask why only 189MHz on the memory? Surely DDR500 should go much higher

[Killer Munkey]

AXP-M 2600+ @ 2.5ghz (200x12.5) 1.8vcore 34-35c load

rest of stuff in sig

[Electric Bill]

Well I upgraded my mobo from a DFI NF2UltraB to this nice and shiny new Epox 9NDA3+ so I figured I should update my oc. Needless to say I'm happy with it.

http://ebill.home.att.net/9NDA3/screenie_9x295.gif

Lots of people claiming super high oc's with the A64 boards but imho if it won't run Prime95 at least 12 hours it ain't stable. Since i did the screenie I've dropped the Vcore .05v. The Gold rev. 3 RAM is almost as fast as my PQI TCCD. When I was testing I got the OCZ (2x512) up to 260MHz and the PQI (2x256) up to 268MHZ. The 3000 Winchester multi is upward locked so I can't go higher then 9x and since it was soon apparent that the CPU could run higher than the RAM I dropped the RAM divider from 200 (1:1) to 166. As you can see that at a core speed of 295MHz my RAM is at 241MHz.
Bill

[neokenzo]

Current speed in sig prime stable :)

[harleybro]

Here is what I was running my 3500+ I never checked prime stability for more than an hour but I ran F@H 24/7 and never had a problem gaming. Now I am trying to see what I can do with my new ram and a 3000+ due in tomorrow.
http://img114.exs.cx/img114/3521/screen8th.jpg

[Electric Bill]

neokenzo - its really hard to read your SIG. You might consider using a larger font and/or lighter color. Had to highlight it to be able to read it.

harleybro - nice oc btw. Its gonna be tougher with a 3000 and the 9x multi.

When I got my new board and before I figured out how to best utilize the HT and the memory divider I was maxed out at 9x268 Prime stable. I started looking around and saw people over at some of the overclocking forums posting some outrageous numbers and most of them said that Prime95 wasn't relevant to the A64 processors. That's probably because they couldn't run prime stable. At some of the other forums I belong to we call that a suicide run. Nice for bragging rights but not really useful for anything else. It was considered that for a valid oc you had to post a screenie with at least cpu-z, Prime95 (12hr min) and 3DMark all showing on a full screen capture. Personally I think that its still a valid requirement. I can run my 9NDA3 at 338 core freq but its anything but stable. Here are some of the FSBs I tried:
At 8x340 I couldn't boot into Windows.
At 338 Windows would start but crash if I tried SuperPi.
At 330 I would would crash out of 3DMark.
At 325 3DMark wouldn't load properly.
At 320 everything worked but my Sandra and SuperPi benches were lower than with the 9 multi and my temps were 50-51°C running Prime95 so I went back to 9x295.
You guys can both run the higher multis so you can run your RAM at the 200MHz or 1:1 divider setting. Depending on what RAM you have you can run 250-270MHz and get the full potential from it.
Since i'm stuck with the 9x or lower multi and my RAM will crap out at 260 for the OCZ Hynix and 268 my PQI TCCD. I have to use the 166 setting which is an /11 divider. There have been times when I regretted not buying a 3200 but lately I've seen a lot of people complaining that some but not all of the 3200's don't do that well so I think I did alright after all.
Bill

[harleybro]

Bill I have actually seen some real nice OC's on the 3000+. I am a member over at AMD forums and I will say they have done very well. The 3000 and the 3500 are talked about most outside of the FX's. I actually would rather do more with my 3500 have seen posts hitting 3 on H20 but unfortunately my memory controller seems to be taking a dump at high fsb. When I get my 3000+ in I will try and run everything you mentioned and get a screenie here. Thanks for the input about your clocks.

[Electric Bill]

I use the same name over there as well so if I can supply you with anything usefull don't hesitate to PM me.
Bill

[SLaY3r]

See rig...

1:1 Divider but can't get 2.6GHZ fully stable but I might try using some dividers.

[idleuser]

Hey wassup guys i'm a bit new here so just wanted to stop by and say hi :) Did you say a64 isn't prime stable? well I got prime stable for 22hour + before I stopped it :) I do agree about not being prime stable with alot of winchester users to me priming for 8 hours is hardly priming my system failed at 2610mhz at the 9th hour of priming before it crashed. Now i'm running stable at 2565mhz prime and PI stable. I had to reseat my waterblock which I think is the cause of my system crashing at 2.6ghz.

My system specs are:

Athlon 64 3000+ 90nm 1.8ghz oc to 2565mhz
Msi Neo2 Platinum
PQI Turbo Samsung TCCd 2x256MB 1:1 timing
BFG 6800nu 128MB
H2o Watercooled

http://img.photobucket.com/albums/v91/spyd3rman/overclocked1.jpg

[Blueball]

2.7Ghz STABLE
NF7-s Rev 2
XP2500 Mobile @ 13.5 x 200

Custom water rig HERE (http://www.bleedinedge.com/forum/showthread.php?t=7586)

I can't get past 2.75Ghz no matter what I do ... I tried 2.3V CPU and 3.4V on the ram ...
My last mod to this board is going to be a mosfet WB and a NorthBridge WB.

Sisoft CPU Score (is this good compared to a Winchester?)
11,383
4,394

[Electric Bill]

Nice Blueball - I followed the link to your project thread and its quite impressive. Like I said above - lots of people claim unlikely oc's but your photo documentation is awesome. Yes 11383 is right up there with an oc'd 939. :bow:
Bill

[Blueball]

I have never liked prime95 ... boring.

I prefer real world tests .. like 3DMark and Gaming.

I generally run my system at 2.1V CPU and 3.1V DDR ... and 2.65Ghz

I am going to Vmod my mobo and push 2.5V+ when my TEC's are installed and working properly. It's either THAT or my NB cooler. I will mod both soon enough.

[SLaY3r]

I am idiot, what I really need is a better power supply. I have a mediocre Aspire 500W w/ 34A on the 12V Rail. I am gonna sell that and buy a 420W OCZ Powerstream... w00t

[Electric Bill]

I'm pretty happy with the NeoPower so far SLaY3r. I don't have all those extra wires to deal with either.
Bill

[FireDancer]

After many hours of reading asking questions and just plain ol failing I finally got my Athlon 64 4000+ OC'ed at 2.6@220 FSB 1.65 Vcore, Ram running @ 2:1 DDR 400 timings are 3-4-4-8
on 2 X 1 gig sticks of OCZ PC 3200 DDR 400.

This might not be the best OC but it is my VERY first and from what I hear 2 X 1 gig sticks are hard to work with so I am proud of my self that I didnt nuke my mobo LOL :yikes: Temps right now with ALOT of air are 39C idle and 55C Loaded

It sustained SuperPI and Prime95 for about the last 6 to 7 hours. Think im gonna start looking into some extreme liquid for cooling. The mobo doesnt seem to like anything over 225 FSB. No matter what I do it just screams at me when I push to 225 so I backed it to 220 and thought better happy with 220 then without a puter at all at 250!!! :yikes:

Will keep reading and asking questions and thanks all to the help you have given me

Regards,
FIREDANCER :fire:

[GregP24]

My prco will do 2.7ghz stable, but mem won't. Obvisouly I get better performance with 1:1@2.65ghz than with 5:4@2.7ghz.

3-4-4-8@2.85 seems to be all my mem will allow at these speeds. Unless someone knows a secret to getting better perf?

[BB_One]

GregP24,

Checks some threads around here and focus on your timing, or ask for help in a new thread, those timing @ 265 for you Platinum rev 2, are shall we say less then stellar. You should be able to run those at somewhere around 2.5-4-3-7 (10), or 2.5-3-3-10 or there abouts.

Look for a thread from Chris#, on a Gigabyte board for example, and look for the recent results for glorfy DFI nf4 board, take your time and read them and work on your timing.

[GregP24]

Ah, doesn't really matter. The VX will be here tomorrow. My CPU is only stable to 270FSB. SO, unless the VX can go to 300FSB at 1T, I'll be staying in the 260-270 range.

[BB_One]

250 / 260 @ 2-2-2-5 with 3.4 Volts +/-, often seen. 270, ummm don't think I've seen that but then again positive surprises are always welcomed. Should be able to compare, my VX and TCCD should be here next week.

[GregP24]

I'll take 260@2-2-2-5.

I did loop memtest for 7.5 hours at 3-4-4-7@266 with no errors. I guess I'm not as proficient with mem OCing as I should be. Time to learn.....

[glorfy]

250 / 260 @ 2-2-2-5 with 3.4 Volts +/-, often seen. 270, ummm don't think I've seen that but then again positive surprises are always welcomed. Should be able to compare, my VX and TCCD should be here next week.

I'll be looking forward to that bud! If the problems with TCCD on DFI NF4 get sorted I thin k the extra bandwidth provided by running TCCD at 300+ 2.5,4,3,10, will surpass the VX at 260 2,2,2,5 - but thats my gut feeling, no more. I know with BH5/6 2X512, is not meant to O/C as well as 2X256 - I don't know if this holds true for VX, can anyone LMK?

My CPU with current set up is limited to 2700. The overclock I like the most is 260X10 2,2,2,5 1:1, just because its neat and tidy! My BH6 maxes out at 3.5-3.6v 262 2,2,2,5. Extra voltage from here just causes no boot :(

Blueball - I hear what you say about prime95! I nearly died of boredom the other night, someone wanted me to do Superpi 16M just to prove my DDR520 was stable, logest 10-15 minutes EVER! I wanna use my PC not watch it spew out numbers :)

[Osiris]

My second build. First was a P4 i ripped out of my Dell because I wanted to tweak stuff and it sucked, thus beginning my OC fun

64 3200+ at 2.5Ghz (10x250) Winchester
MSI K8N Neo2 Platinum
XP-90 w/Thermaltake smartfan
1g OCZ PC3200 Pl rev 2 at DDR 500 2.5-3-3-9
Ultra X-connect UV 500w PSU
BFG NV 6800 Ultra OC
SB Audigy 2 value
1 Pata WD 80
2 Sata WD 80's (Raid 0)
PIC (http://webpages.charter.net/sicksider/UV.JPG)

[Jeff7181]

MSI K8N Neo2 Platinum
Week 2 '05 Winchester 3500+ @ ~2.39 (217x11)
Crappy Mushkin CH-5 RAM at 217 2-3-3-7

[castelluci]

I bought the Foxconn NF4U. I didn't realize until I bought it that it had the new chipset.

So far the board kicks watoosi! However, today Windows Expoloer can't find my two optical drives. HMMMMM. So far Foxconn tech support has been excellent. But today I call and told the guy my problem. He offered a fix that didn't work. Now I call back & noone picks up the phone.

So, I'm starting to wonder if I got a bargin at all by paying Newegg $108 for a socket 939 NVidia 4 board. We'll see.

BTW, if anyone has a quick fix that will help me "see" my optical drives, please tell me. The BIOS recognizes them. So I'm thinking, Windows XP Professional is being a crackwhore.

Later

[Jeff7181]

Actually I just discovered today while playing around that I can run 2.53 GHz stable. 230x11 1.47V with my RAM @ 5:4 2-3-3-10.

I ran 3DMark2k1 to compare scores and only scored about a hundred points higher... I think because my RAM went from 217 MHz down to 184... actually 180 as read by CPU-Z.

I still seem to hit a rather hard wall at 240 MHz with a RAM any higher than 2:1 :scratch:

*EDIT* Now I'm running Prime95 @ 2.35 GHz... 235x10 with 5:4 memory divider still. And CPU-Z is reading 195 MHz for the RAM. What the heck was making it see the RAM speed as only 180 MHz with a 230 MHz HTT speed and 5:4 divider?

[Action169]

Posting these for review & suggestions For Improvement.

[Action169]

Posting These for review & suggestions

[Blueball]

Actually I just discovered today while playing around that I can run 2.53 GHz stable. 230x11 1.47V with my RAM @ 5:4 2-3-3-10.

I ran 3DMark2k1 to compare scores and only scored about a hundred points higher... I think because my RAM went from 217 MHz down to 184... actually 180 as read by CPU-Z.

I still seem to hit a rather hard wall at 240 MHz with a RAM any higher than 2:1 :scratch:

*EDIT* Now I'm running Prime95 @ 2.35 GHz... 235x10 with 5:4 memory divider still. And CPU-Z is reading 195 MHz for the RAM. What the heck was making it see the RAM speed as only 180 MHz with a 230 MHz HTT speed and 5:4 divider?

I am surprised you can even POST with such a low cpu voltage. My mobile chip is 1.45V stock. I run it upto 2.2V daily.
I thought the lowest stock volts on a 754/939 chip was 1.65V?!?
Maybe you don't because your cooling is insufficient.

[Blueball]

Posting These for review & suggestions

How about a screen shot of the CPU and RAM benchmarks. That'll tell us alot more.
And perhaps some temp readings.

[Jeff7181]

Actually I just discovered today while playing around that I can run 2.53 GHz stable. 230x11 1.47V with my RAM @ 5:4 2-3-3-10.

I ran 3DMark2k1 to compare scores and only scored about a hundred points higher... I think because my RAM went from 217 MHz down to 184... actually 180 as read by CPU-Z.

I still seem to hit a rather hard wall at 240 MHz with a RAM any higher than 2:1 :scratch:

*EDIT* Now I'm running Prime95 @ 2.35 GHz... 235x10 with 5:4 memory divider still. And CPU-Z is reading 195 MHz for the RAM. What the heck was making it see the RAM speed as only 180 MHz with a 230 MHz HTT speed and 5:4 divider?

I am surprised you can even POST with such a low cpu voltage. My mobile chip is 1.45V stock. I run it upto 2.2V daily.
I thought the lowest stock volts on a 754/939 chip was 1.65V?!?
Maybe you don't because your cooling is insufficient.


HELL NO... lol. I won't comment on the 2.2V... lol

But yeah... 90nm A64's are 1.400 stock, 130nm A64's are 1.55 stock.

[Action169]

Sorry didnt think to run a Mem test?

Any advice for Mem test FreeWare? or any other Benchmarking FreeWare.
This was my first Rig built. I've learned allot too say the least.
My last rig was a Commodore 64 if you can think back that far? :coocoo:

[Action169]

Sorry didnt think to run a Mem test?

Any advice for Mem test FreeWare? or any other Benchmarking FreeWare.
This was my first Rig built. I've learned allot too say the least.
My last rig was a Commodore 64 if you can think back that far?

[cmp010]

My mobile 2600+ is at 2630 mhz now, and my 3200 winchester is runnin stock till the ram comes in.
Just realized my sig is screwed up, better go fix it

[Wild Child]

First post here guys/girls... so wassup and here are my specs.

Rig one:
AMD 3800+ 939
ASUS A8V Deluxe Rev.2

Rig two:
AMD 3700+ 754
Giga-Byte K8VNXP

[lobob420]

Im stable at a decent oc!

Rig:

AMD 3500+ winnie @ 1.55v 2650Mhz
MSI Neo2 Plat
Ram 2x512 PC2700 old gay ram :( @ 166

http://pics.bbzzdd.com/users/lobob420/yay.JPG

[barry6743]

Athlon 64 +3000 @2478 (275x9)

[Plavix]

Hi,
New results after waiting for RMA on my 6600GT so I got SLI running now!

An overclock of 2500MHz Stable with ram running 1T and 2.2.2.5 @3Vdimm
10 x 250 cpu start 1.425 amd special @start x 123%, LDT - 1.4V, NB - 1.7V
Temps nice@ CPU 29C, PWMIC 41C & NB - 32C using SmartGaurdian?

Using clockgen I can easily pass 2,7GHz with same settings!

I will do some beches and screenies soon as!

Plavix :rock:

[SiXShot]

3000+ Winchester (DIK4BI) @ 2.3 GHz (260x9)
1GB of mixed Samsung PC3200 and PC2700 @ 216
4x HT

[flexkill]

http://server2.uploadit.org/files/flexkill-theclock.JPG

[k4M4kz1]

:thumb:

[nhelal56]

3800+ @ 2.7MH v1.6 (WATER COOLING)

[stealth17]

my 24/7 3000+ 0449 MPM winnie 30c load 1.65v i think it will do 2.7 but never really tried...

im running TCCD but really weird timings and stuff as you can see because my memcontroller sucks :(

got a 3700+ San Diego coming though! :na:

http://img.photobucket.com/albums/v632/stealth17/stable2610.jpg

[flexkill]

http://i4.photobucket.com/albums/y123/flexkill/flexkill-theclock.jpg

[PaternityTest]

2.7 ghz 3000+ Venice @1.65 on AIR :na:
screens here
http://forums.pcper.com/showthread.php?t=389303

[Electric Bill]

DFI nF4 Ultra-D.
This is as high as I can go and still be stable in 3DMark01 and Prime95 (SP2004 Version).
I've run Prime at 10x285 all night but 3DMark crashed as soon as I ran it.
Also tried 9x multi but I still can't go above 2790MHz. Not really complaining though I wish it would have stopped at a nice round number like 2800. http://www.planetsmilies.com/smilies/happy/1/happy26.gif

http://newportyachtdirectory.com/nF4_Ultra-D/10x279_screenie.gif

[nutcase]

well, this is my best so far..

DFI LP UT NF4 SLI-d
FX-55, Caa2c 0515BPMW
1 Gb Ocz PC3200 Plat Rev 2
cooled with Vapo LS

[jram]

Still testing but so far 10X255 at 1.60v stable with 35C, cooled with xp120 and fan set at 2k.

[Electric Bill]

DFI nF4 Ultra-D.
Well I popped in 2-512MB sticks of OCZ Platinum rev 2 (TCC5 I believe) and got the 10x280 I was looking for. Currently using Andy T's guidelines from the Memory Forum - Timings for TCCD/TCC5 @ 275mhz-300mhz (3200 Plat EL Rev 2, 3700, 4200, 4800 Platinum).

http://newportyachtdirectory.com/nF4_Ultra-D/10x280_OCZ/10x280_OCZ_screenie.gif
Bill

[topboy]

Just got this in today and having a play....but seems to be a nice overclock

Messing around with it on a Abit Fatal1ty AN8 SLI.....Review to follow. :thumbs:

http://valid.x86-secret.com/show_oc.php?id=21684


Now lets see if it will do 3G

[Redrum]

[B]Got a DFI NF-4 Ultra D for Fathers day so I will be going 64 soon. Gathering hardware as I type this. 3000 Venice to start. Guess I'll have to retire my NF-2 Ultra Infinity in my Sig..

[Archi0112]

Here is my second OC with this MOBO in 1 day...
but i am still hungry :thumb:

CPU 1,79v
LDT 1,15v
DRAM 2,78v

http://img63.echo.cx/img63/2015/yeaaaa7oz.th.png (http://img63.echo.cx/my.php?image=yeaaaa7oz.png)

[hey]

VNF3-250 (heres the funny part) 754 Sempron 2600@2120 on air using stock sink/thermal pad , 2x256 Patriot ram at 265/3-3-4-8@2.8V (ya figure thats a 520mhz OC using stock cooling)

Yeah, thats right, stock everything :D Never broken 45C

[Fire-N-Ice]

best Oc so far!
53% OC on my cpu (1800 to 2754, 954 mhz OC!!:))
10.2% OC on the ram (DDR500 to DDR551)
11.4% OC on the vid card (500/1000 to 557/1100)
31.5% OC on moniter (19" to 25")

All this on stock cooling, and stably running all the benchmarks, and my apps!

[kcstock]

DFI nF4 Ultra-D.
Well I popped in 2-512MB sticks of OCZ Platinum rev 2 (TCC5 I believe) and got the 10x280 I was looking for. Currently using Andy T's guidelines from the Memory Forum - Timings for TCCD/TCC5 @ 275mhz-300mhz (3200 Plat EL Rev 2, 3700, 4200, 4800 Platinum).

Bill

Where can i find this thread about the memory timings? I searched through the Memory forum here and cannot seem to find anything with that title.

Thanks!
Ken

[Electric Bill]

Look here (http://www.bleedinedge.com/forum/showthread.php?t=9833&highlight=DFI+Timings).

[kcstock]

cool, thanks. I did not think to look in there and the search did not return that for me.

Thanks Again.
Ken

[ex2cib]

my everyday stable OC

http://photobucket.com/albums/y123/cibrstorm/?action=view&current=32m_295_tight.png

DFI lanparty nf4 ultra-d 618-3

2.83v on the ram, 1.52 on the CPU

CPU is 0517 APJW
ram is ocz plat. rev. 2 tcc5

just the more recent things ive done with it
max 1m i can run is about 313, and on a good day, 314
fastest aquamark i ran was at 310 1:1, 13.8k CPU score

chipset and LDT voltages are each the 2nd value from the bottom. i forgot what those are.

[Electric Bill]

Well I'm sorry to have to report that I've dropped my oc down on both my Epox and DFI boards. After extensive tests on another forum it appears that the A64 processors - at least the Winchester, Venice and SanDiego - are having issues. I first noticed problems when I started playing FarCry on the DFI and it started crashing out of the game. Previously I had been Prime stable over 12 hrs. and had no problems in 3DMark01 at 10x280. Then my Epox did the same. It seems that once the memory controller on the A64 (Winny and Venice in my case) gets damaged from too high a Vcore or Memory frequency it goes down hill rapidly. I'm able to run the Mem at 1:1 on my DFI Venice 3200 at 10x270 now but only by setting my mem at cl 3.0. The Epox Winchester is at 9x274 on a 166MHz divider.

Bill

[malinois1]

:yup: :yup: I have noticed the same thing with 2 Venice cpu's so far. My bud's and mine both had to come down off of a once stable OC :( . I think with my X2 it will be wise to stay on default voltage and see how far I can take it that way.

[Rukee]

X2 4600 @ 2.75GHz x 2 @ std voltages in a DFI SLI. Waiting for memory that will do better then the 230fsb the 2gig kit I have now. :)

[catkicker]

Finished the new rig project today and had a itch to see what this 3500+ Clawhmmer and nF4 board could do.
http://img155.imageshack.us/img155/6503/aquamark0sl.jpg (http://imageshack.us)

http://img155.imageshack.us/img155/4359/benchmarling27ghz2fm.jpg (http://imageshack.us)

http://img155.imageshack.us/img155/9729/6600gt0cz.jpg (http://imageshack.us)

running MEM on divider for now, more interested in seeing what this chip has to offer. I'm going to need to do some homework on MEM settings, LOL never had to setup timmings for the speeds I'm seeing and probably will see higher. Love those Voltages and Temps on 2.7 + GHz. Thankyou DD.

shimmishim It's looking good. you were right on about this chip :thumbs:

[{LSK} Otacon]

well, im not OCing the CPU, but i am OCing my GPU. And my card is a PNY Verto GeForce FX 5200 128MB 8x AGP, its standard speeds were 250MHz core 400MHz memory. I got it to hit 302MHz core and 500MHz memory withouht a problem but i feared burning it up so i lowerd it down to 275MHz core and 485MHz memory and so far it has not caused me one problem. I bought it bout a year ago.

[{LSK} Otacon]

For the picture i couldnt get it back to 302MHz and 500MHz but i got it very close. If you ask me, these stats are very impressive for a $100 bottom of the line card. Considering this card is considered mainstream and not performance.

[{LSK} Otacon]

forgot to load pic, here it is

[{LSK} Otacon]

Im testing the card now to see how it does at these speeds playin Joint Operations with all the graphics turned off. Most FPS iv had on this game is 54.

[{LSK} Otacon]

ok the results are in.......It performed very well under some intense action and did get very very hot, but didnt overheat. I have reset the clock speeds to standard to prevent it from overheating. Here is a picture of the FPS i got while testing it at 300MHz core and 492MHz memory.....

[shimmishim]

Finished the new rig project today and had a itch to see what this 3500+ Clawhmmer and nF4 board could do.
http://img155.imageshack.us/img155/6503/aquamark0sl.jpg (http://imageshack.us)

http://img155.imageshack.us/img155/4359/benchmarling27ghz2fm.jpg (http://imageshack.us)

http://img155.imageshack.us/img155/9729/6600gt0cz.jpg (http://imageshack.us)

running MEM on divider for now, more interested in seeing what this chip has to offer. I'm going to need to do some homework on MEM settings, LOL never had to setup timmings for the speeds I'm seeing and probably will see higher. Love those Voltages and Temps on 2.7 + GHz. Thankyou DD.

shimmishim It's looking good. you were right on about this chip :thumbs:


like i said before... i miss that chip! congrats on getting speeds that i was able to get :)

[{LSK} Otacon]

Here is a picture of my card. It is a very small card, but it does amazing things.

[{LSK} Otacon]

Want some proof my $100 card can still kick some ass?? Here ya go, 312MHz core and 492MHz memory, thats its max and it still gets very hot, but it doesnt seem to become unstable.

[Hyperlite]

Athlon XP-M
1.8vcore
213x11=2343 mhz

[NINaudio]

A64 Venice 3500+
1.63 vcore
250*11 = 2750 mhz

[-n7-]

Rig is in sig, but since it may change...

AMD Athlon 64 Venice 3200+ @ 2.6 GHz (10*260) ~1.53V
LBBLE 0516EPMW (week 16)

Mushkin High Performance (supposedly anyway :scratch: ) PC3200 2x1024 MB
@ DDR433 (2.5-3-2)

[Avalon]

A64 3000+ Venice @ 2.61, 1.575v
Zalman 7000CNPS-AlCu for cooling
DFI NF4 Ultra-D
2x512MB Mushkin Blue UTT (haven't played around with these yet)

Not too bad, and it keeps me happy. I usually just run at 2.52 with 1.475v, though. Seems like the sweet spot for my system.

[glorfy]

A64 X2 3800
DFI NF4 SLI-DR

Thermaltake Silent boost with 78cfm fan - 2.51GHz (10X251), 1.4v
Prometeia Mach II - 2.85 (10X285 w 180 divider), 1.52v.

[cwa4me]

A64 FX-55+Clawhammer
DFI NF4 SLi-DR

I have a XP-90c with a 92mm tornado for cooling
I'm @ 215x13 = 2797mhz

[computerdude]

A64 3500+ stock air cooling @ 2.6ghz now.

[Clay]

XP-M 2600+ A7N8X-E Deluxe 2484mhz 12X207@1.75vcore 2-2-2-11 timings Stable. I've had it over 2.52 not completely stable though.(1.825vcore) My new ocz el ddr pc3500 gold gx won't give me the 217 fsb yet.(Just reboots or config errors at that frequency multi doesn't seem to matter.)Perhaps I got a rare bad stick.vdimm@2.8
Maybe I missed something in the bios. Any hints? Anyone? Thanks "Clay" :o

[BB_One]

You may want to raise this problem in the memory forum Clay, it will get more exposure and you have a better chance of getting MORE help there. Sounds like timing issues, catch you in that forum and welcome to BE.

[Duvie]

AMD 4400+ X2 @ 2.574ghz
vcore 1.456v(idle)/1.488v(load)
temps 29c(idle)/51c(load)
XP90c w/ Zalman 92mm fan
MSI NEO2 (bios A1.03 TCCD version)
1gb og GSkill PC4400 at 515ddr cas 3-4-3-10

[Clay]

I had to change my timings to 2-3-2-11 to get it stable@12x207 vcore now 1.725 doom3-superpi stable now.(I'll prime95 when i get time) I think I'll try a couple of diffrent bios see if I can post better results. current 2484mhz. More soon!! :D

[gijoe]

fx-55 claw@3327 237x14 1.6v
gskill 2.5-3-3-8 1:1 3v

[Fenryial]

My system is: (and still going to OC when I know whats best)
Asus A8NSLI - Deluxe (Bios 1013)
AMD FX57
2 x1gb OCZ Titanium @ 2-3-2-5
BFG 7800GTX
SB X-FI
WD Raptor 74GB sata
WD 250GB sata-2
Sony dvd/cdrw
Plextor dvdrw
Athena 550w psu

I will post some bechs when I get more stuff loaded. Its still so new :)

[H[]R3NDUS]

i have a Asus A8v rev2 mb
vapochuill Pe
Cm Stackercase
Duel 550 true power psu
2x Hitachi 160 gb ide drives
6800 GT
Kingmax 2x256 ddr mem
blah blah blah

athalon64/3000 @ 300 x9 stable
athalon64/3500 @ 300x10 stable

both at max vcore

both will run doom 3 timedemo 1 around same speeds 155 fps low quality -set for cpu speed.

ultra quality is around 100 fps. vid card cpu stress.

[Missile Maker]

Athlon64 3700+ Clawhammer CG Stepping

2.65GHz (265HTT x 10) Vcore @ 1.550 + 1.04% Special VID Control (1.612VCore)
1:1 on OCZ400ELPER2 @ DDR530 @ 2.5-3-3-10 1T VDIMM @ 2.82
HTT Multiplier 3X

Missile Maker

[TopHat]

Athlon 64 3000+ @ 2.4ghz on a XP-90/Scythe kamikaze

[MRGREENEYES]

Heres mine...And thats with OCZ 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Platinum System Memory.
CPU : AMD Athlon 64 3700+ (*1)
CPU PSN : AMD Athlon(tm) 64 Processor 3700+
CPU EXT : MMX (+) 3DNow! (+) SSE SSE2 SSE3 x86-64
CPU Cache : L1 : 64/64 KB - L2 : 1024 KB
Core : San Diego (0.09) / 0xF71 / SH-E4
Freq : 2640.18 MHz (240.02 * 11)
----------------------------------
MB Brand :MSI
MB Model : MS-7025
NB : nVidia nForce3 250 rev A1
SB : nVidia nForce3 MCP rev A2
----------------------------------
RAM Size : 2048 MB
RAM Freq : 240 MHz
RAM Type : DDR-SDRAM Dual Channel
RAM Ratio : CPU/11
RAM Timings : 2.5-3-3-7
----------------------------------
Slot 1 : 1024MB (PC3200)
Slot 1 Manufacturer : OCZ
Slot 2 : 1024MB (PC3200)
Slot 2 Manufacturer : OCZ

[leo_bsb]

MSI K8N NEO4/SLI
Athlon 64 X2 3800+ from 2000 @ 2500 (250*10)
HTT * 4
OCZ 4000 Gold 2,5-4-4-7 1T

[GiANT]

Asus A7N8X-E-Delux
XP2500+ Barton @ 223 x 11 = 2.46Ghz :rock:

[Spirit]

AMD X2 4800+ CCBWE-0522TPMW @ 2.605GHz (12x217x5) 1.45v no extra.
Thermalright SI-120 (120mm Thermaltake 78cfm fan)
DFI NF4 Lanparty SLI-DR (BIOS 704-2BT)
(2x1024) OCZ4002048ELDCPE-K 217mhz 1:1 2-3-7-2 1T 2.73v
MSI 7800GTX 500/1300
4 x 74GB SATA 1.5 Gb/s WD Raptor RAID 0
PC P&C TuboCool 510 SLI
2 x 120mm Thermaltake fans (1 in & 1 out)

Genie BIOS Settings:

FSB Bus Frequency - 217
LDT/FSB Frequency Ratio - 5
CPU/FSB Frequency Ratio - 12
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - Auto

CPU VID Control - 1.450v
CPU VID Special Control - Above VID * 0%
LDT Voltage Control - 1.30v
Chip Set Voltage Control - 1.60v
DRAM Voltage Control - 2.7v
+.03v Enabled

DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:1/01
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.0
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 07 Bus Clocks
Row precharge time (Trp) - 02 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - 14 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Normal
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 04 x
32 Byte Granularity - Disable(4 Bursts)

[MickeyMouse]

stock 2400mhz x2
1100mhz x2 overclock 3d stable
http://valid.x86-secret.com/show_oc?id=62236
http://img403.imageshack.us/img403/7571/cpuz0og.jpg

[mursaat]

Everything is on my sig. I will receive soon (I hope as soon as in the next 3 hours :D) an Opteron 165 CCBWE 0551 UPMW. Will post results as soon as I stress it :)

//EDIT with results

SAME config as with the Venice, but with lover vcore. Now running 300x9 with 1.325x113%.

[digger]

Hi fellas i've just put this system together and I know nothing about AMD's but I've o/c this from 2gig to 2.7gig. Currently running at 2.6. Cant get 2.8 which I was hoping for but I think I have maxed my Ram or something.
Still I'm happy with this. Might get 2.8 or higher with PC4800 RAm, maybe.

[mursaat]

You can use a memory divider or a higher proc multiplier. Inside Genie Options in bios. Refer to the mobo manual for this :)

[ElvenNerfer]

I'm running an Athlon XP-M at an even 2.40Ghz now. (Stock 1.80Ghz)

Turns out, things were overheating before due to the intense amount of crap inside my case. I've now learned not to keep my compy directly on carpet.

[digger]

I'm up to 3gig. htt x3. memdivider 166. these 170's are mindless overclockers. Dont know why I stuck with Intel for so long.

[leet_noob]

AMD Athlon 64 3000+ Venice (S939) 1.8GHz stock oc'd to 2.5GHz with a Zalman CNPS9500 LED cooler, stable idle temps at 31c and load temps at around 39c, im using crap ram btw, 1GB corsair branded generic, so i put a divider on the ram

[MRjnGrWs]

Has anyone overclocked a fx60 yet on a a8n32 mobo. any help would be great thanks!

[commander]

BFG NF4
AMD 3700+ (255*11)
Thermalright XP-90C
OCZ Platinum 2GB Kit PC 3200 (5-2-3-2 1T)
WD 74GB Raptor


well after a friend was bragging on his damn overclocks i decided to push my machine to its limits

for the longes time i had my machine at 233*11=2.6 w/ ram at 5-2-4-2.5 2T)

http://hostfree.us/main/pic.php?u=476nc0cu&i=8863

then i set my ram to different clocks and set it to ddr 333 (radio of like 5/6 .. on my board i set it to an index of 166mhz)

<img src="http://hostfree.us/main/pic.php?u=476nc0cu&i=8864"></img>

this is what i got now... pretty nice if ya ask me

http://hostfree.us/main/pic.php?u=476nc0cu&i=8860
http://hostfree.us/main/pic.php?u=476nc0cu&i=8861

i decided to stop since i couldnt go any higher than 255.. i didnt feel like changing anything

good luck people

[zeus_999]

My current OC of my gaming rig 350x8
http://valid.x86-secret.com/show_oc.php?id=86442

[TopHat]

Check the Sig. Hoping to push some more into the cpu and am soon going to look into a pair of 7600GT cards for another budget SLi Setup -OR- Sell my mobo and 6800's off and buy a Crossfire board with two X1800GTO cards and pay the difference... :scratch:

Regardless, this CPU will last me long enough till AM2 bugs are worked out.

[bf2nut]

I'll go first obviously :wave: I have This CPU (http://pichosting.pcthike.com/DAPUNISHER/xp2100) with these max stable settings (http://pichosting.pcthike.com/DAPUNISHER/CPUZ) on a Soltek SL-75FRN-L CPGeek tweaked 1.3L bios

http://valid.x86-secret.com/show_oc?id=88502 fsb 249@2.75 cas 3-3-2-6 1:1 ,cpu @1.36 volts
http://valid.x86-secret.com/show_oc?id=88346 fsb 247 @2.7.cas 2.5-3-2-5 cpu\12 ,cpu @1.36 volts
cas 2.5 below
CPU : AMD Athlon 64 3700+ (*1)
CPU PSN : AMD Athlon(tm) 64 Processor 3700+
CPU EXT : MMX (+) 3DNow! (+) SSE SSE2 SSE3 x86-64
CPU Cache : L1 : 64/64 KB - L2 : 1024 KB
Core : San Diego (90 nm) / 0xF71 / SH-E4
Freq : 2738.58 MHz (248.96 * 11)
----------------------------------
MB Brand : DFI Corp LTD
MB Model : LP NF4 Series
NB : nVidia nForce4 rev A3
SB : nVidia nForce4 MCP rev A3
----------------------------------
RAM Size : 4096 MB :rock:
RAM Freq : 228.2 MHz
RAM Type : DDR-SDRAM Dual Channel
RAM Ratio : CPU/12
RAM Timings : 2.5-3-2-5 :rock:
----------------------------------
Slot 1 : 1024MB (PC3200)
Slot 1 Manufacturer : OCZ
Slot 2 : 1024MB (PC3200)
Slot 2 Manufacturer : OCZ
Slot 3 : 1024MB (PC3200)
Slot 3 Manufacturer : OCZ
Slot 4 : 1024MB (PC3200)
Slot 4 Manufacturer : OCZ

cas3 below
CPU-Z Database (ID : 88502)
Submitted by railmeat-bf2nut!
Submitted on Sat, 22 Apr 2006 02:32:13 +0200 with CPU-Z 1.33.1

[bf2nut]

stock 2400mhz x2
1100mhz x2 overclock 3d stable
http://valid.x86-secret.com/show_oc?id=62236
http://img403.imageshack.us/img403/7571/cpuz0og.jpg


wow:rock: and using 2 gigs :thumb:

[eatont9999]

Look at my signature to see OC. Not much, but I need my P.C. and it is only on air right now. I am using the HSF from a X2 4400+ (939).

[baltoos]

After playing around with Intel products for a couple of years, I've switched over to the DARK SIDE! After a disappointing experience with an Asus A8N-E board (could not get it to run 1T Command at anything over 245HTT:mad: ), I picked up a DFI Lanparty UT UT nF4 SLI-DR Expert board. The CPU is an AMD Opteron 148 (CABYE 0542FPMW). Of course, I've tried tweaking the settings just a little:

http://img.photobucket.com/albums/v186/baltoos/New%20Comp/RigSettings.gif
http://img.photobucket.com/albums/v186/baltoos/New%20Comp/Temps.gif

I've gotten it to boot into Windows at 3.0 GHz (300x10) but System stability left a bit to be desired.
All in all I'm quite pleased with this setup & I want thank everybody & especially Tony at OCZ, for posting their results & settings here. It's been most helpful! I'd also like to thank Sean at OCZ for his wonderful help with a couple of RMA's & his technical advice!
-Dave

[jakyl]

AMD 2600 Barton, stock 1.9, currently @ 2.5
1024 OCZ EL DC DDR, stock 2-3-2-6, currently @ 2-2-2-5 (440mhz)
XFX 7600GTX
250 WD SATA II 16mg cache
Raidmax X-1 Case
Ultra X-Connect 500w PSU
Temp Idle : 42-44c
Temp Load: 54-59c

This is my old "muscle car" like a vintage computer LOL. It's fast as **** though, but its carbeurated, not injected!

[jakyl]

AMD 2600 Barton, stock 1.9, currently @ 2.5
1024 OCZ EL DC DDR, stock 2-3-2-6, currently @ 2-2-2-5 (440mhz)
XFX 7600GTX
250 WD SATA II 16mg cache
Raidmax X-1 Case
Ultra X-Connect 500w PSU
Temp Idle : 42-44c
Temp Load: 54-59c

This is my old "muscle car" like a vintage computer LOL. It's fast as **** though, but its carbeurated, not injected!

Oh yeah

MOBO: ABit KW7 Via KT880 Northbridge (better than a NF2, IMO)
***I have a fan instead of a heatsink on the NB (vantec iceberq) and a heatsink on the southbridge)***

[bf2nut]

dfi ultra d(non sli modded)
bfg 7950gx2
4 gigs ocz plat 150 div,t2,cas 2.5-3-2-5,fsb 300 = 2.7ghz on my amd opty 165 cores running stock voltage @ 1.29 volts on water idle 33 load 42
xfi extrememusic card
2x36 raptors in raid 0
silverstone 850 watt p\s and air cooling with 13 case fans,liquid cooling with swiftech p655 pump,danger den cpu block,fluid xp-uv blue fluid,triple 120mm rad.

3dmark05 13,234
http://service.futuremark.com/compare?3dm05=2146114

3dmark06 8,003
06 wont post..

few pics:rock:

http://i76.photobucket.com/albums/j11/bf2nut/bf2nuts7950.jpg

http://i76.photobucket.com/albums/j11/bf2nut/w2.jpg

http://i76.photobucket.com/albums/j11/bf2nut/4gigs-1.jpg

http://i76.photobucket.com/albums/j11/bf2nut/tehstuff.jpg

http://i76.photobucket.com/albums/j11/bf2nut/close.jpg

http://i76.photobucket.com/albums/j11/bf2nut/morecrap.jpg

http://i76.photobucket.com/albums/j11/bf2nut/5rigs.jpg

http://i76.photobucket.com/albums/j11/bf2nut/ehetoys.jpg

http://i76.photobucket.com/albums/j11/bf2nut/beater64.jpg

http://i76.photobucket.com/albums/j11/bf2nut/oping_rigs.jpg

05run

http://service.futuremark.com/compare?3dm05=2146114

cpuz

http://valid.x86-secret.com/show_oc?id=110310

[Prospector]

DFI LP UT NF4 SLI-DR Opteron 165@334x9 3.0Ghz BFG 7600GT OC
2x1GB G.Skill PC4000 Tt Big Typhoon(lapped) Panaflo 115cfm fan
2x36gb Raptors Raid0 160gb Seagate SataII storage drive
OCZ Powerstream 520 Tt Xaser 2000A Nexus fan controller
UV and CCFL:rock: :rock: :rock:

[bobbytomorow]

Dang bf2nut, that setup is hella tight man.

Asrock 939Dual-sataII X2 3800+@260x10 2.6GHz Arctic Cooler freezer pro
Build by ATI x1800xt@690MHz gpu\ 1600MHz mem
2x1gb OCZ Platinum@216 2.5 3 2 5
250gb maxtor HDD 8mb
OCZ Modstream 450w
Audigy 2

[{LSK} Otacon]

AMD 64 X2 3800+ OCed at 2.6ghz/260mhz fsb:

http://img219.imageshack.us/img219/5821/260mhzpiqk2.jpg (http://imageshack.us)

[ramakin]

I'm a amd peeps whos looking hard at that 2.93 extreem will probably be my next build.
not a gamer love speed though !:mischeif:

[T-REX]

my Manchi :chit:

so rated at

200Mhz
x10
2000Mhz
1,35V

clocked at

280Mhz
x10
28000Mhz
1,52V

AIRCOOLED
idle 28°C
load 41°C

watch 10h dualpriming (http://img241.imageshack.us/img241/868/152vxu7.png)

[Ivan Os]

Opteron 148
DFI NF4 Ultra-D
OCZ EB 4000 2 x 1GB
Best 1M result (cooled by air/Sonic Tower+120mm fan):
http://img100.imageshack.us/img100/5545/pitest35ze.th.jpg (http://img100.imageshack.us/my.php?image=pitest35ze.jpg)

Dfi-street forum s.939 Overclocking Database entry:

http://www.dfi-street.com/forum/showpost.php?p=348471&postcount=115

[bf2nut]

old 3700sd,7900gtx setup...
http://i76.photobucket.com/albums/j11/bf2nut/05_06_2.jpg

http://i76.photobucket.com/albums/j11/bf2nut/ehetoys.jpg


new opty 165,7950...
http://i76.photobucket.com/albums/j11/bf2nut/bf23dmark06.jpg

http://i76.photobucket.com/albums/j11/bf2nut/w2.jpg

http://i76.photobucket.com/albums/j11/bf2nut/tehstuff.jpg

http://i76.photobucket.com/albums/j11/bf2nut/bf2nuts7950.jpg

[liquidcooled]

My system is: (and still going to OC when I know whats best)
Asus A8NSLI - Deluxe (Bios 1013)
AMD FX57
2 x1gb OCZ Titanium @ 2-3-2-5
BFG 7800GTX
SB X-FI
WD Raptor 74GB sata
WD 250GB sata-2
Sony dvd/cdrw
Plextor dvdrw
Athena 550w psu

I will post some bechs when I get more stuff loaded. Its still so new :)

Im sorry but this has to be bogus? @6307 MHZ

[bball4ever39]

Its something for now AMD 3700+ at about 2.75Ghz, gonna try and get a wc set up for it too push it a bit further, need to get myself a DFI Ultra D for my ram as well, dang UTT BH5 just won't do much at 3Vdimm or lower. The rig does do a 30s super pi so its not all bad. :D
http://img55.imageshack.us/img55/4476/1tsuperpifasterzk0.th.jpg (http://img55.imageshack.us/my.php?image=1tsuperpifasterzk0.jpg)

AMD 3700+ San Diego @ 2.75GHz (Zalman 7000B-Cu LED)
1 GB OCZ Gold 2-2-2-5 @ 230MHz
EVGA 7900GT KO @ 537/850 (Stock HS)
160GB Seagate SATA HDD

[cream]

This (http://www.badongo.net/pic/320683) is what I managed to do on the stock cooler:|

[bf2nut]

Dang bf2nut, that setup is hella tight man.

Asrock 939Dual-sataII X2 3800+@260x10 2.6GHz Arctic Cooler freezer pro
Build by ATI x1800xt@690MHz gpu\ 1600MHz mem
2x1gb OCZ Platinum@216 2.5 3 2 5
250gb maxtor HDD 8mb
OCZ Modstream 450w
Audigy 2

thanks bro,
i like my bf2 to look and play like silk:wpleased:
raptor-x(clear case 150 gig 16mb) here tue

8800gtx soon to replace my 7950gx2 with matchng kentsfield or amd quad core when they finally come out im on em....:rock:

[flybye444]

Will try for 3ghz later need more patience

[bf2nut]

currently im benching with 1700tbreds as financing aint stretching to a new intel set up however tha pair i have at the moment are good ones cant wait to get a canterwoody setup... both below are prometeia cooled
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/DVC00050.JPG
does
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/2959.GIF

and this one
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/cpu2.JPG
does
http://www.majormav.pwp.blueyonder.co.uk/1700%20screeniesr/2972cpuzgif.gif


:thumb: :eek: :thumb: :bow: .....wow

[Blueball]

Wow .. that XP1700 Overclock is awesome.

Sorry my pic sucks

Here's mine ... X2 3800+ running at 2.69Ghz
Memory bandwidth of 6922Mb/s
19477 Drystone
16373 Whetstone

BFG OC 6800GT SLI at 420/1090

[silverback61373]

http://i126.photobucket.com/albums/p101/rthiggins/tested.jpg
newbie but not bad for air cooled :cool:

[paulxmn]

DFI LP NF4 Expert Crucial Ballistix 2GB LED


http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Expert/StressPrime2800.jpg

[paulxmn]

DFI LP NF4 Ultra D OCZ 1GB (2x512) Gold VX

http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Ultra%20D/StressPrimeocz11x254.jpg

[paulxmn]

DFI LP NF4 Venus #349 Mushkin PC3200 2GB Black

http://i44.photobucket.com/albums/f18/paulxmn/DFI%20Venus/StressPrime2800.jpg

[likewhoa]

DFI Venus nForce4/Opteron 165 @ 3150Mhz, 1.58v/PC4000 Munskin Redlines @ 3-3-3-6 2.71v 260Mhz, 24 Hours Prime Stable.

http://weboperative.com/gallery/qdig-files/converted-images/Misc/OC/med_350x9-1.450v-3dmark2001se.png (http://www.weboperative.com/gallery/?Qwd=./Misc/OC&Qif=350x9-1.450v-3dmark2001se.png&Qiv=thumbs&Qis=M&Qtmp=FS)

[hightest]

270x10/1.450v/limit 183@3/3/3/7/2.60v=245.5 on ram

just wandering if vcore v dimm ratio is safe i used v core of 1.5v to be safe and came up with 0.2 as my diff

[hightest]

eh majorav ive got a 1800 like that when i get time i will put it in my ultra b board and see what it can do
i only have the si97 air cooler thou i didnt know about overclocking when i had the 1800 my 1rst overclocking rig was a mobile 2500 and a lanparty ultra b
time to go throu the closet and see what else i have in there

[1Avatar]

http://valid.x86-secret.com/show_oc?id=198127

Any suggestions on improvements on stock voltage?