PDA

View Full Version : New toy arrived (quick test)


harleybro
10-17-2007, 11:56 AM
My new toy came in the mail today :mischeif: A quick test on water was called for. :thumbs:

http://i63.photobucket.com/albums/h140/harleybro/1024wrpime.jpg
Just Learnin'
10-17-2007, 12:17 PM
All righty then!
boshuter
10-17-2007, 01:21 PM
:thumb:
NINaudio
10-17-2007, 03:48 PM
You mean you don't have a Penryn yet? :lol:
BeeHay
10-17-2007, 03:59 PM
glorious! :bow:
harleybro
10-17-2007, 06:27 PM
You mean you don't have a Penryn yet? :lol:

Hehe would love one but I don't have the right connections. :lol:
harleybro
10-17-2007, 07:54 PM
I think 4300 is very possible with cooler water. ;) This run was boot into windows and hit start. :D

http://i63.photobucket.com/albums/h140/harleybro/wprime.jpg
Sir Golitech
10-17-2007, 09:22 PM
:yikes: :rock: :rock: :cool: :fire: :rock:

Sweet stuff HB, sweet stuff
1Day
10-17-2007, 09:56 PM
That is so sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeet does this mean top ten is under threat?
Nosfer@tu
10-18-2007, 02:36 AM
You have to get higher :D
Xt0m from OCteamDenmark will tease you forever if you dont :D

What mobo and Vcore m8 :D ?
Core temp ?
rra
10-18-2007, 06:57 AM
Im green with jealousy what with QX6850 that you have and our friend down inDenmark with those yummie Yorkies (trying to get his address :D )
Nice one Harleybro show that cpu who is boss:thumb:
harleybro
10-18-2007, 07:15 AM
You have to get higher :D
Xt0m from OCteamDenmark will tease you forever if you dont :D

What mobo and Vcore m8 :D ?
Core temp ?

Oh I definately will. I hope to have it under LN2 by this weekend. :D I am running the P5K deluxe and need to remount my vcore mod. :mischeif: Also need to flash to a newer bios to recognize the cpu properly.
Pointhore
10-19-2007, 02:59 PM
Sweet! :rock: Looking forward to the LN2 results. :thumb:
harleybro
10-21-2007, 09:29 AM
Just an update for now. I am working on finding a bios to allow me to fully use the cpu. So far I am stuck with a mak multi of 11 and I know I will need 12-13. I have found various mobos seem to be capping the multi and some bioses are affecting it also. Once I can use the higher multi's I will go for LN2. ;)
boshuter
10-21-2007, 06:25 PM
Just an update for now. I am working on finding a bios to allow me to fully use the cpu. So far I am stuck with a mak multi of 11 and I know I will need 12-13. I have found various mobos seem to be capping the multi and some bioses are affecting it also. Once I can use the higher multi's I will go for LN2. ;)

Hmmm..... sounds like someone is expecting close to 6ghz :yikes:

Won't that board run 500+ fsb?
Hawk
10-22-2007, 04:24 AM
Sweet. . . . . :thumbs:
harleybro
10-22-2007, 05:14 AM
Won't that board run 500+ fsb?

Nope not expecting 6 gig. The board will do 500 but I don't believe the chip will. ;) I am counting on 450 but also need a PLL mod. 450*12 will give me 5400. :D
boshuter
10-22-2007, 09:00 AM
Ahhh... will they clock higher at lower fsb?
harleybro
10-24-2007, 04:40 AM
Ahhh... will they clock higher at lower fsb?

That has been whats been told to me. Not sure if you remember the FX-57 days the guys pulling really high clocks used low fsb to do so. The reason being the memory controller being on die.
harleybro
10-27-2007, 06:47 PM
Well some quick runs on LN2. My soldering iron dies so I need a vmod......hopefully tomorrow. I am totally walled due to voltage 1.68 bios reading. Higher multi w/ lower fsb won't work. At least an improvement on two scores. I also made a faster 32wprime and was in the middle of a 1024 run but overpoured.

Wprime1024....4min 52sec 920ms (http://www.hwbot.org/result.do?resultId=660051)

http://i63.photobucket.com/albums/h140/harleybro/wprime32.jpg
Just Learnin'
10-27-2007, 06:56 PM
What is "overpoured" HB? Too cold, spillage...?
harleybro
10-27-2007, 07:00 PM
What is "overpoured" HB? Too cold, spillage...?
Too cold the temps dropped too far. I think once I can push 1.8-1.9v into this I should be good to around -120- -130 still sort of learning the chip. :thumb:
Just Learnin'
10-27-2007, 07:19 PM
If anyone can "learn" the chip it will be you Harley! :thumbs: :bow:
1Day
10-27-2007, 10:02 PM
Harleybro get with he program - spillage is bad over-pouring is sort of bad to Just lucky that it was LN2 and not brew. So pleased for you that you have a great chip my friend Top Ten here you come
harleybro
10-29-2007, 03:14 PM
Ok going to be back at it. I did the vcore mod and went to run, surprise no-boot. :irk: Today I really started to try and figure what was going on. First pulled the mod, no go, then I pulled the vga, still no improvement, then I started to play with ram. For some weird reason the black slots no longer work but the yellow ones do. :mischeif: Mod back in place and insluated hope to be giving it a go shortly. :D
Just Learnin'
10-29-2007, 09:06 PM
Good luck HB! :bow: :thumbs: :beer:
harleybro
10-30-2007, 05:25 AM
Thanks JL but my mobo might be on the way out. Last night I had tried it again and was plagued w/ bsods. I did beat my runs but crashed before I could screenie any of them. :irk: I might give it one more go tonight we'll see.
ol'norton
10-30-2007, 11:44 AM
Goodluck harleybro, Hope you get something to show for all the work. :beer:
bball4ever39
10-30-2007, 06:35 PM
If anyone can "learn" the chip it will be you Harley! :thumbs: :bow:Yes! Be the chip! :thumbs:

We need some insanely way too fast super pi 1m's :D
harleybro
11-02-2007, 05:54 PM
So now once again I am back on the black slots which refused to boot for me multiple times. :coocoo: I said why not and grabbed out the soldering iron and added a vmch mod. :D I cranked up the voltage to about 1.78 and booted right into windows but crashed at 4700. :yup: Hmmm checked my vcore and I had lowered it last time so back up it went to 1.78. A quick try on wprime and out pops 9sec flat. :D Next maybe the Vpll mod. :mischeif: Oh yeah btw this was at around -60c. ;)

http://i63.photobucket.com/albums/h140/harleybro/9sec1.jpg
boshuter
11-02-2007, 06:47 PM
Good work harley..... now you are starting to roll :thumbs:
Just Learnin'
11-02-2007, 09:10 PM
Hmmm... this thread is like a roller coaster ride Harley! :lol: I think I've mourned for this rig a couple times now only to see you Frankenstein it back to life, and then some. :hide:
harleybro
11-02-2007, 09:33 PM
JL it totally is. I was ready to sell the cpu a few days back and if the offer came through it would have been gone. The last few months have been that way for me. I have had so many mobo's die that mysteriously started working (after multiple tries) 3-4 days later. If this weekend proves nothing new then I must give up (at least I keep telling meyself that :rotflmao: )
OnYX
11-03-2007, 09:15 AM
So now once again I am back on the black slots which refused to boot for me multiple times. :coocoo: I said why not and grabbed out the soldering iron and added a vmch mod. :D I cranked up the voltage to about 1.78 and booted right into windows but crashed at 4700. :yup: Hmmm checked my vcore and I had lowered it last time so back up it went to 1.78. A quick try on wprime and out pops 9sec flat. :D Next maybe the Vpll mod. :mischeif: Oh yeah btw this was at around -60c. ;)

http://i63.photobucket.com/albums/h140/harleybro/9sec1.jpg

pretty cool, I must say :D what a monster of a Quad, darn if I had the money... but you know Jay. :p
on a side note: CPU-Z seems to guess the voltage right... how come? My 1.41 beta doesn't have a clue.
harleybro
11-03-2007, 02:35 PM
More playing again. I am not sure if the mobo is holding me back or this is it for the chip. :scratch: Everything has been under -70c so it's definately a great dice/water chip.

First some 06 testing:
7354 is very good for these clocks and should be 20th in FM hall of fame for cpu score.:mischeif:
http://i63.photobucket.com/albums/h140/harleybro/7354.jpg

I have also done wprime 1024 at this speed but crashed on the save :irk: I had one wprime in at 9.840 I think it was the same where the 1024 crashed on me.

http://i63.photobucket.com/albums/h140/harleybro/4725.jpg