PDA

View Full Version : No boot problem on new rig



Zilveari
11-10-2006, 07:23 PM
With a P5B-E, thermaltake armor case, OCZ GameXstream 600W PSU, 2x1GB DDR2 800 Corsair XMS2. When I plug the PSU into the wall and switch it on the Green LED by the CMOS battery glows solid green. I hit the power button, and the LED's on the front panel don't light up. The fans spin up for an instant then stop, the PSU fan does the same thing. I also get no system beeps.

I've tried resetting the CMOS the way the manual says. I've troubleshooted the internal system connectors. I'm out of ideas now.

Zilveari
11-10-2006, 08:17 PM
nevermind I found the problem. Rookie mistake on my 3rd rig =.= Had a rogue spacer grounding the board.