setting of DFI Lan party - memory

[Nitro]

Ive bought new DFI LAN PARTY Ultra II B, AMD 2800+ and OCZ Performance 3200 rev.2 512MB memory. What are the right CPU settings in BIOS? I cant find the right FSB,multiplier and so on to make it working. My only working settings are: FSB-166MHz, multiplier-default and FSB: Memory 2:3. Its 2800+ but memory only 222MHz. Are that correct settings? :look:

Btw SiSoft Sandra Memory Benchmark results:
RAM Bandwitch Int Buffered aMMX/aSSE : 2416 MB/s
RAM Bandwitch Fload Buffered aMMX/aSSE : 2277 MB/s

[Tony]

Hi, and welcome to the forum.:)

You need to set the ram ratio to 1:1.I take it your cpu is muliplier locked so setting 166fsb is a good place to start.

Set Vcore to auto and vdimm to 2.6V.set the chipset voltage to 1.6V also.

Memory timings are module specific but setting 10-3-3-3-2.5 should get you a boot and let you tweak from there.

[Paragon]

:welcome: to the BleedinEdge Nitro :wave:

[Nitro]

Thanx :D
I was a bit tweaking and get memory to 223 (446) MHz, and CPU to 2.23GHz. Its stable now and CPU performance is like Athlon 3200+ :cool: Thanks anyway.
Benchmarks after tweaking memory:
RAM Bandwitch Int Buffered aMMX/aSSE : 3308 MB/s
RAM Bandwitch Fload Buffered aMMX/aSSE : 3026 MB/s

[Tony]

Thats not to bad...be sure to make sure everything is stable..run a few tests...