Wr 4800+

[BB_Mods]

http://www.linkforcecorner.com/uploader/files/1/omfgbbqwtfroflcopter.JPG


Looking good thus far, ihs is still on and only under my mild cascade...

http://valid.x86-secret.com/show_oc?id=89669

[tipsy]

:eek:

Nice job!

[BB_Mods]

Thank's mate...my core temp was only -25*c...ill put eather dice, or ln2 on it this weekend and try for more, i feal it has room left seeing as the ihs was still on the cpu :)

[DaveT]

very nice.....is it benchable?

[BB_Mods]

on my tiny cascade (was made for a northbridge) i can bench just fine @ 3.3ghz with bothcores fully loaded my core temp is only -25*c...i can get it benching well over 3.4 after i put my big boy cascade on it :)

[BB_One]

Very well done indeed - umm 4800+ might still be a viable option to look at ....them 2nd hand should start appearing pretty soon on the resale market ......

Best start looking at something for I got a bet that says socket 939 will eat AM2 - but got to get meself the right proc to back that up + little prommy GT+ is still quietly waiting in other room to come to life.....-25c under load is also a nice number i like.....

Well done BB_Mods....

[harleybro]

Great job my friend. :beer: Awesome work on the OC and would like to see that one on DI unless it coldbugs. ;) I would highly suggest leaving the IHS on it sounds like it's got great contact with both cores as is. No need to possibley damage a good chip if contact isn't an issue. :D

[BB_Mods]

No cold bug...it can take ln2 at full force, i loaded her up with the 3" copper pot @ 394 htt @ 3.12ghz or something odd and booted into winblow's @ -12 core, ran some pi then droped LN2 on it full force...no cold bug..at all...as in...none!

[TopHat]

Those are some pretty tight timings :eek:

Just a question though, if the cpu is -25*C, why would it not beable to bench? I figure being below +25*C in load would be heaven :rotflmao: ...

*Where can I go to search for overclocks like you have done. I am at the X86 secrets site but I am stumped...

[BB_Mods]

with the temp's i have now i can run as much 3d as i want with -25*c temp's as long as i dont go past 3.3ghz....

[nutcase]

Those are some pretty tight timings :eek:

Just a question though, if the cpu is -25*C, why would it not beable to bench? I figure being below +25*C in load would be heaven :rotflmao: ...

*Where can I go to search for overclocks like you have done. I am at the X86 secrets site but I am stumped...

here is the link:

http://valid.x86-secret.com/search.php

[TopHat]

Yeah I found it after checking the forums. Some of those validations seem bunked. The top 3000 for example says 6000mhz, but the picture only shows it as 2000mhz and others say they are validated but no picture is provided...

[nutcase]

Yeah I found it after checking the forums. Some of those validations seem bunked. The top 3000 for example says 4000mhz, but the picture only shows it as 2000mhz...

actually it is a bug in the database.. If somebody submits a score and it makes the top ten, and they beat that score, the database will show the new score but the old link :scratch:

[BB_Mods]

Yea Frank is working on fixing it....i think mine show's a 2.4ghz 4800+ or something...