Duvie
01-02-2004, 12:28 AM
I have:
Abit IC7 non modded for max 2.8v vdimm
2.4c@3.5ghz w/ 1.58v actual (292fsb)
Enermax 430watt
2x 512mb Geil Ultra Platinums
I could do these sticks at 466mhz cas 2.5,8,3,3 with 1:1 at 233fsb....
However after 255fsb or so on this board I loose my ability to run 5:4 ratio and thus have to run with 3:2.....though cas 2,7,3,2 with CPC enabled...must have the ch-5 chips on it or something....
I would like to hear what your recommendation is for some chips that will run 5:4 for 466mhz at cas 2.5 timings at least or even cas 2 timings with the vdimm I have to offer on a moderate oc'd system so far....I can go as high as 3.55ghz with 1.65v actual but the 50mhz of benefit doesn't outweigh the added vcore and heat....
So basically I woul like to keep it in the 275-250 range at least so I wont have to drop too much out of my pocket after selling these sticks....
Abit IC7 non modded for max 2.8v vdimm
2.4c@3.5ghz w/ 1.58v actual (292fsb)
Enermax 430watt
2x 512mb Geil Ultra Platinums
I could do these sticks at 466mhz cas 2.5,8,3,3 with 1:1 at 233fsb....
However after 255fsb or so on this board I loose my ability to run 5:4 ratio and thus have to run with 3:2.....though cas 2,7,3,2 with CPC enabled...must have the ch-5 chips on it or something....
I would like to hear what your recommendation is for some chips that will run 5:4 for 466mhz at cas 2.5 timings at least or even cas 2 timings with the vdimm I have to offer on a moderate oc'd system so far....I can go as high as 3.55ghz with 1.65v actual but the 50mhz of benefit doesn't outweigh the added vcore and heat....
So basically I woul like to keep it in the 275-250 range at least so I wont have to drop too much out of my pocket after selling these sticks....