OCZ Modstream 520W Ram Voltage Problem

[Chasten]

Hey guys,

I'm running a DFI Ultra-D, AMD 3500 WINNY, and 2x512 Corsair Twinx4400C25. When adjusting my voltages, my cpu and chipset voltage remains consistent with the settings that I choose. All the rails are pretty close as well. But for some reason, my ram voltages is always .9 higher then what I have it set. IE: 2.8V will show up as 2.89. 2.7 will show up as 2.79. Is there a problem with my PSU?

Daryl

[dr_hardware]

You're measuring the voltages with a DMM ?
or your monitoring software?

It's probably the mobo overvoltaging a bit ( it's ok & normal )

[RyderOCZ]

Hi Chasten,

It is not the PSU but the mobo that is the culprit....Mine is exactly as you say and I have used 4 different power supplies on the board. No worries :)

If you only want exactly 2.7v for instance, just set 2.6 which should give you 2.69 which is very close to 2.7 of course :)

Hope that helps :wave: